Documentation
|
Documentation.Tutorials-Presence-PuaBlaConfig History
Hide minor edits - Show changes to markup
July 02, 2014, at 03:05 PM
by 89.120.101.121 -
Changed line 93 from:
if (is_method("SUBSCRIBEY") && uri==myself) {
to:
if (is_method("SUBSCRIBE") && uri==myself) {
July 02, 2014, at 02:53 PM
by 89.120.101.121 -
Changed lines 1-6 from:
<-Back
Download
# # OpenSIPS configuration file # # Bridge Line Appearance( event:dialog;sla) #
# ----------- global configuration parameters ------------------------ debug=3 log_stderror=no log_facility=LOG_LOCAL0
fork=yes children=4
listen=udp:10.10.10.10:5060
# ------------------ module loading ---------------------------------- mpath="/usr/local/opensips/lib/modules/"
loadmodule "db_mysql.so" loadmodule "sl.so" loadmodule "maxfwd.so" loadmodule "textops.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "presence.so" loadmodule "presence_xml.so" loadmodule "mi_fifo.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "pua.so" loadmodule "pua_bla.so" # for 1.5 you must load also signaling module; uncomment the next line #loadmodule "signaling.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/opensips/modules/auth.so" #loadmodule "/usr/local/lib/opensips/modules/auth_db.so"
# ----------------- setting module-specific parameters --------------- # --mi_fifo params -- modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
# -- usrloc params -- modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
# -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password")
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# -- presence and presence_xml params -- modparam("presence|presence_xml", "db_url", "mysql://opensips:opensipsrw@localhost/opensips") modparam("presence", "server_address", "sip:sa@10.10.10.10:5060") modparam("presence_xml", "force_active", 1)
# -- pua and pua_xmpp params -- modparam("pua", "db_url", "mysql://opensips:opensipsrw@localhost/opensips") modparam("pua_bla", "server_address", "sip:sa@10.10.10.10:5060") modparam("pua_bla", "default_domain", "10.10.10.10") modparam("pua_bla", "header_name", "Sender")
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; };
if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route();
# subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if(method == "INVITE") setflag(5);
if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS #if(uri=~"@tls_domain1.net") { # t_relay("tls:domain1.net"); # exit; #} else if(uri=~"@tls_domain2.net") { # t_relay("tls:domain2.net"); # exit; #} route(1); };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {
if( is_method("PUBLISH|SUBSCRIBE")) route(2); if(is_method("NOTIFY")) if( $hdr(event)=="dialog;sla") route(2);
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication #if (!www_authorize("opensips.org", "subscriber")) { # www_challenge("opensips.org", "0"); # exit; #};
if($hdr(User-Agent)=~ "PolycomSoundPointIP") bla_set_flag();
save("location"); exit; };
# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); };
route(1); }
route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; }
route[2] { if (! t_newtran()) { sl_reply_error(); exit; };
if(is_method("PUBLISH")){ if($hdr(Sender)!= NULL) handle_publish("$hdr(Sender)"); else handle_publish(); } else if( is_method("SUBSCRIBE")){ handle_subscribe(); } else if(is_method("NOTIFY")){ bla_handle_notify(); t_reply("200", "OK"); }
exit; }
to:
#
# OpenSIPS 1.11.x configuration file
#
# Bridge Line Appearance( event:dialog;sla)
# BLA + SIP Presence Server
#
# ----------- global configuration parameters ------------------------
debug=3
fork=yes
log_stderror=no
check_via=no
dns=no
rev_dns=no
listen=udp:10.10.10.10:5060
children=2
# ------------------ module loading ----------------------------------
mpath="/usr/local/opensips/lib/modules/"
loadmodule "db_mysql.so"
loadmodule "sl.so"
loadmodule "signaling.so"
loadmodule "tm.so"
loadmodule "maxfwd.so"
loadmodule "textops.so"
loadmodule "sipmsgops.so"
loadmodule "rr.so"
loadmodule "mi_fifo.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "presence.so"
loadmodule "presence_xml.so"
loadmodule "pua.so"
loadmodule "pua_bla.so"
# Uncomment this if you want digest authentication
#loadmodule "auth.so"
#loadmodule "auth_db.so"
# ----------------- setting module-specific parameters ---------------
modparam("mi_fifo","fifo_name","/tmp/opensips_fifo")
# -- usrloc params --
modparam("usrloc","db_mode",2)
modparam("usrloc","db_url","mysql://opensips:opensipsrw@localhost/opensips")
# -- auth params --
# Uncomment if you are using auth module
#modparam("auth_db", "calculate_ha1", yes)
#modparam("auth_db", "password_column", "password")
# -- presence params --
modparam("presence|presence_xml","db_url","mysql://opensips:opensipsrw@localhost/opensips")
modparam("presence","server_address","sip:sa@10.10.10.10:5060")
modparam("presence_xml","force_active",1)
# -- pua and pua_bla parameters --
modparam("pua","db_url","mysql://opensips:opensipsrw@localhost/opensips")
modparam("pua_bla", "server_address", "sip:sa@10.10.10.10:5060")
modparam("pua_bla", "default_domain", "10.10.10.10")
modparam("pua_bla", "header_name", "Sender")
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks
if(!mf_process_maxfwd_header("10")) {
send_reply("483","Too Many Hops");
exit;
}
if (has_totag()) {
# sequential requests within a dialog should
# take the path determined by record-routing
if (loose_route()) {
# route it out to whatever destination was set by loose_route()
# in $du (destination URI).
route(relay);
} else {
if (is_method("SUBSCRIBEY") && uri==myself) {
# in-dialog subscribe requests
route(handle_presence);
exit;
} else if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but stateful ACK; must be an ACK after
# a 487 or e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction ->
# ignore and discard
exit;
}
}
send_reply("404","Not here");
}
exit;
}
# CANCEL processing
if (is_method("CANCEL")) {
if (t_check_trans())
t_relay();
exit;
}
t_check_trans();
# authenticate if from local subscriber (uncomment to enable auth)
# authenticate all initial non-REGISTER request that pretend to be
# generated by local subscriber (domain from FROM URI is local)
##if (!(method=="REGISTER") && from_uri==myself) {
## if (!proxy_authorize("", "subscriber")) {
## proxy_challenge("", "0");
## exit;
## }
## if (!db_check_from()) {
## send_reply("403","Forbidden auth ID");
## exit;
## }
##
## consume_credentials();
##}
# record routing
if (!is_method("REGISTER|MESSAGE"))
record_route();
if (uri!=myself) {
# routing to other SIP domains
route(relay);
}
# SIP 2 SIP presence traffic
if (is_method("PUBLISH|SUBSCRIBE")) {
route(handle_presence);
exit;
}
# handle BLA Notifications
if (is_method("NOTIFY") && $hdr(event)=="dialog;sla") {
bla_handle_notify();
t_reply("200", "OK");
}
if (is_method("REGISTER")) {
# Uncomment this if you want to use digest authentication
#if (!www_authorize("", "subscriber")) {
# www_challenge("", "0");
# exit;
#}
if ($hdr(User-Agent)=~ "PolycomSoundPointIP")
bla_set_flag();
save("location");
exit;
}
# native SIP destinations are handled using our USRLOC DB
if(!lookup("location")) {
send_reply("404","Not Found");
exit;
}
route(relay);
}
route[relay]{
# send it out
if(!t_relay())
sl_reply_error();
exit;
}
route[handle_presence]
{
if(!t_newtran()){
sl_reply_error();
exit;
}
if (is_method("PUBLISH")) {
if($hdr(Sender)!= NULL)
handle_publish("$hdr(Sender)");
else
handle_publish();
} else
if (is_method("SUBSCRIBE")) {
handle_subscribe();
}
exit;
}
May 09, 2013, at 01:51 PM
by 109.99.235.212 -
Added lines 1-6:
<-Back
Download
# # OpenSIPS configuration file # # Bridge Line Appearance( event:dialog;sla) #
# ----------- global configuration parameters ------------------------ debug=3 log_stderror=no log_facility=LOG_LOCAL0
fork=yes children=4
listen=udp:10.10.10.10:5060
# ------------------ module loading ---------------------------------- mpath="/usr/local/opensips/lib/modules/"
loadmodule "db_mysql.so" loadmodule "sl.so" loadmodule "maxfwd.so" loadmodule "textops.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "presence.so" loadmodule "presence_xml.so" loadmodule "mi_fifo.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "pua.so" loadmodule "pua_bla.so" # for 1.5 you must load also signaling module; uncomment the next line #loadmodule "signaling.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/opensips/modules/auth.so" #loadmodule "/usr/local/lib/opensips/modules/auth_db.so"
# ----------------- setting module-specific parameters --------------- # --mi_fifo params -- modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
# -- usrloc params -- modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
# -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password")
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# -- presence and presence_xml params -- modparam("presence|presence_xml", "db_url", "mysql://opensips:opensipsrw@localhost/opensips") modparam("presence", "server_address", "sip:sa@10.10.10.10:5060") modparam("presence_xml", "force_active", 1)
# -- pua and pua_xmpp params -- modparam("pua", "db_url", "mysql://opensips:opensipsrw@localhost/opensips") modparam("pua_bla", "server_address", "sip:sa@10.10.10.10:5060") modparam("pua_bla", "default_domain", "10.10.10.10") modparam("pua_bla", "header_name", "Sender")
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; };
if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route();
# subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if(method == "INVITE") setflag(5);
if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS #if(uri=~"@tls_domain1.net") { # t_relay("tls:domain1.net"); # exit; #} else if(uri=~"@tls_domain2.net") { # t_relay("tls:domain2.net"); # exit; #} route(1); };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {
if( is_method("PUBLISH|SUBSCRIBE")) route(2); if(is_method("NOTIFY")) if( $hdr(event)=="dialog;sla") route(2);
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication #if (!www_authorize("opensips.org", "subscriber")) { # www_challenge("opensips.org", "0"); # exit; #};
if($hdr(User-Agent)=~ "PolycomSoundPointIP") bla_set_flag();
save("location"); exit; };
# native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); };
route(1); }
route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; }
route[2] { if (! t_newtran()) { sl_reply_error(); exit; };
if(is_method("PUBLISH")){ if($hdr(Sender)!= NULL) handle_publish("$hdr(Sender)"); else handle_publish(); } else if( is_method("SUBSCRIBE")){ handle_subscribe(); } else if(is_method("NOTIFY")){ bla_handle_notify(); t_reply("200", "OK"); }
exit; }
|