Documentation

Documentation.Tutorials-Presence-PuaDialoinfoConfig History

Hide minor edits - Show changes to markup

July 02, 2014, at 02:04 PM by 89.120.101.121 -
Changed lines 1-5 from:

<-Back

Download

#
# OpenSIPS configuration file
#
# BLF , event:dialog
#

# ----------- global configuration parameters ------------------------


debug
=3            # debug level (cmd line: -dddddddddd)
fork
=yes
log_stderror
=yes

sip_warning
=0

check_via
=no  # (cmd. line: -v)
dns
=no          # (cmd. line: -r)
rev_dns
=no      # (cmd. line: -R)
listen
=udp:10.10.10.10:5060
children
=4


# ------------------ module loading ----------------------------------
mpath
= "/usr/local/lib/opensips/modules/"

loadmodule
"db_mysql.so"
loadmodule
"sl.so"
loadmodule
"maxfwd.so"
loadmodule
"textops.so"
loadmodule
"sipmsgops.so"
loadmodule
"tm.so"
loadmodule
"rr.so"
loadmodule
"dialog.so"
loadmodule
"presence.so"
loadmodule
"presence_dialoginfo.so"
loadmodule
"usrloc.so"
loadmodule
"registrar.so"
loadmodule
"pua.so"
loadmodule
"pua_dialoginfo.so"
loadmodule
"signaling.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "auth.so"
#loadmodule "auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --
modparam
("usrloc", "db_mode", 2)
modparam
("usrloc", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")

# -- dialog params --
modparam
("dialog", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- presence and presence_xml params --
modparam
("presence", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam
("presence", "server_address", "sip:sa@10.10.10.10:5060")

# -- pua params --
modparam
("pua", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- pua_dialoginfo params --
modparam
("pua_dialoginfo", "presence_server", "sip:sa@10.10.10.10:5060")

# -------------------------  request routing logic -------------------

# main routing logic


route
{

 
# initial sanity checks -- messages with
 
# max_forwards==0, or excessively long requests
 
if (!mf_process_maxfwd_header("10")) {
    sl_send_reply
("483","Too Many Hops");
   
exit;
 
};

 
if (msg:len >=  2048 ) {
    sl_send_reply
("513", "Message too big");
   
exit;
 
};

 
# we record-route all messages -- to make sure that
 
# subsequent messages will go through our proxy; that's
 
# particularly good if upstream and downstream entities
 
# use different transport protocol
 
if (!method=="REGISTER")
    record_route
();

 
# subsequent messages withing a dialog should take the
 
# path determined by record-routing
 
if (loose_route()) {
   
# mark routing logic in request
    append_hf
("P-hint: rr-enforced\r\n");
    route
(RELAY);
 
};

 
# tell the dialog module to monitor all the dialogs
 
if(method == "INVITE")
    create_dialog
();

   
if (!uri==myself) {
   
# mark routing logic in request
    append_hf
("P-hint: outbound\r\n");
   
# if you have some interdomain connections via TLS
   
#if(uri=~"@tls_domain1.net") {
   
#  t_relay("tls:domain1.net");
   
#  exit;
   
#} else if(uri=~"@tls_domain2.net") {
   
#  t_relay("tls:domain2.net");
   
#  exit;
   
#}
    route
(RELAY);
 
};

 
# if the request is for other domain use UsrLoc
 
# (in case, it does not work, use the following command
 
# with proper names and addresses in it)
 
if (uri==myself) {

   
if( is_method("PUBLISH|SUBSCRIBE|NOTIFY"))
      route
(PRESENCE);

   
if (method=="REGISTER") {

     
# Uncomment this if you want to use digest authentication
     
#if (!www_authorize("opensips.org", "subscriber")) {
     
#  www_challenge("opensips.org", "0");
     
#  exit;
     
#};

      save
("location");
     
exit;
   
};

   
# native SIP destinations are handled using our USRLOC DB
   
if (!lookup("location")) {
      sl_send_reply
("404", "Not Found");
     
exit;
   
};
    append_hf
("P-hint: usrloc applied\r\n");
 
};

  route
(RELAY);
}


route
[RELAY] {
 
# send it out now; use stateful forwarding as it works reliably
 
# even for UDP2TCP
 
if (!t_relay()) {
    sl_reply_error
();
 
};
 
exit;
}

route
[PRESENCE]
{
 
if ( !t_newtran() ){
    sl_reply_error
();
   
exit;
 
};

 
if(is_method("PUBLISH")){
    handle_publish
();
 
}
 
else
 
if( is_method("SUBSCRIBE")){
    handle_subscribe
();
 
}

 
exit;
}
to:
Documentation -> Tutorials -> Presence -> Presence User Agent Extensions -> PUA DialogInfo (BFL) config file


#
# OpenSIPS 1.11.x configuration file
#
# Busy Lamp Field ( event:dialog )
# BLF + SIP Presence Server
#

# ----------- global configuration parameters ------------------------

debug=3
fork=yes
log_stderror=no

check_via=no
dns=no
rev_dns=no

listen=udp:10.10.10.10:5060
children=2

# ------------------ module loading ----------------------------------
mpath="/usr/local/opensips/lib/modules/"

loadmodule "db_mysql.so"
loadmodule "sl.so"
loadmodule "signaling.so"
loadmodule "tm.so"
loadmodule "maxfwd.so"
loadmodule "textops.so"
loadmodule "sipmsgops.so"
loadmodule "rr.so"
loadmodule "mi_fifo.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "dialog.so"
loadmodule "presence.so"
loadmodule "presence_xml.so"
loadmodule "pua.so"
loadmodule "pua_dialoginfo.so"

# Uncomment this if you want digest authentication
#loadmodule "auth.so"
#loadmodule "auth_db.so"

# ----------------- setting module-specific parameters ---------------
modparam("mi_fifo","fifo_name","/tmp/opensips_fifo")

# -- usrloc params --
modparam("usrloc","db_mode",2)
modparam("usrloc","db_url","mysql://opensips:opensipsrw@localhost/opensips")

# -- auth params --
# Uncomment if you are using auth module
#modparam("auth_db", "calculate_ha1", yes)
#modparam("auth_db", "password_column", "password")

# -- dialog params --
modparam("dialog", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam("dialog", "db_mode", 2)
modparam("dialog", "dlg_match_mode", 1)

# -- presence params --
modparam("presence|presence_xml","db_url","mysql://opensips:opensipsrw@localhost/opensips")
modparam("presence","server_address","sip:sa@10.10.10.10:5060")
modparam("presence_xml","force_active",1)

# -- pua and pua_dialoginfo parameters --
modparam("pua","db_url","mysql://opensips:opensipsrw@localhost/opensips")
modparam("pua_dialoginfo", "presence_server", "sip:sa@10.10.10.10:5060")


# -------------------------  request routing logic -------------------

# main routing logic
route{

	# initial sanity checks
	if(!mf_process_maxfwd_header("10")) {
		send_reply("483","Too Many Hops");
		exit;
	}

	if (has_totag()) {
		# sequential requests within a dialog should
		# take the path determined by record-routing
		if (loose_route()) {
			# route it out to whatever destination was set by loose_route()
			# in $du (destination URI).
			route(relay);
		} else {
			if (is_method("SUBSCRIBE") && uri==myself) {
				# in-dialog subscribe requests
				route(handle_presence);
				exit;
			} else if ( is_method("ACK") ) {
				if ( t_check_trans() ) {
					# non loose-route, but stateful ACK; must be an ACK after 
					# a 487 or e.g. 404 from upstream server
					t_relay();
					exit;
				} else {
					# ACK without matching transaction ->
					# ignore and discard
					exit;
				}
			}
			send_reply("404","Not here");
		}
		exit;
	}

	# CANCEL processing
	if (is_method("CANCEL")) {
		if (t_check_trans())
			t_relay();
		exit;
	}

	t_check_trans();

	# authenticate if from local subscriber (uncomment to enable auth)
	# authenticate all initial non-REGISTER request that pretend to be
	# generated by local subscriber (domain from FROM URI is local)
	##if (!(method=="REGISTER") && from_uri==myself) {
	##  if (!proxy_authorize("", "subscriber")) {
	##      proxy_challenge("", "0");
	##      exit;
	##  }
	##  if (!db_check_from()) {
	##      send_reply("403","Forbidden auth ID");
	##      exit;
	##  }
	##
	##  consume_credentials();
	##}

	# record routing
	if (!is_method("REGISTER|MESSAGE"))
		record_route();

	# tell the dialog module to monitor all the dialogs 
	if (is_method("INVITE")) {
		create_dialog();
		# publish for both legs
		dialoginfo_set("AB");
	}

	if (uri!=myself) {
		# routing to other SIP domains
		route(relay);
	}

	# SIP 2 SIP presence traffic
	if (is_method("PUBLISH|SUBSCRIBE")) {
		route(handle_presence);
		exit;
	}

	if (is_method("REGISTER")) {

		# Uncomment this if you want to use digest authentication
		#if (!www_authorize("", "subscriber")) {
		#  www_challenge("", "0");
		#  exit;
		#}

		save("location");
		exit;
	}

	# native SIP destinations are handled using our USRLOC DB
	if(!lookup("location")) {
		send_reply("404","Not Found");
		exit;
	}

	route(relay);
}


route[relay]{
	# send it out
	if(!t_relay())
		sl_reply_error();

	exit;
}


route[handle_presence]
{
	if(!t_newtran()){
		sl_reply_error();
		exit;
	}

	if (is_method("PUBLISH")) {
		handle_publish();
	} else

	if (is_method("SUBSCRIBE")) {
		handle_subscribe();
	}

	exit;
}
June 17, 2014, at 07:51 PM by 89.120.101.121 -
Changed line 5 from:
#
# OpenSIPS configuration file
#
# BLF , event:dialog
#

# ----------- global configuration parameters ------------------------


debug
=3            # debug level (cmd line: -dddddddddd)
fork
=yes
log_stderror
=yes

sip_warning
=0

check_via
=no  # (cmd. line: -v)
dns
=no          # (cmd. line: -r)
rev_dns
=no      # (cmd. line: -R)
listen
=udp:10.10.10.10:5060
children
=4


# ------------------ module loading ----------------------------------
mpath
= "/usr/local/lib/opensips/modules/"

loadmodule
"db_mysql.so"
loadmodule
"sl.so"
loadmodule
"maxfwd.so"
loadmodule
"textops.so"
loadmodule
"sipmsgops.so"
loadmodule
"tm.so"
loadmodule
"rr.so"
loadmodule
"dialog.so"
loadmodule
"presence.so"
loadmodule
"presence_dialoginfo.so"
loadmodule
"usrloc.so"
loadmodule
"registrar.so"
loadmodule
"pua.so"
loadmodule
"pua_dialoginfo.so"
loadmodule
"signaling.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "auth.so"
#loadmodule "auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --
modparam
("usrloc", "db_mode", 2)
modparam
("usrloc", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")

# -- dialog params --
modparam
("dialog", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- presence and presence_xml params --
modparam
("presence", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam
("presence", "server_address", "sip:sa@10.10.10.10:5060")

# -- pua params --
modparam
("pua", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- pua_dialoginfo params --
modparam
("pua_dialoginfo", "presence_server", "sip:sa@10.10.10.10:5060")

# -------------------------  request routing logic -------------------

# main routing logic


route
{

 
# initial sanity checks -- messages with
 
# max_forwards==0, or excessively long requests
 
if (!mf_process_maxfwd_header("10")) {
    sl_send_reply
("483","Too Many Hops");
   
exit;
 
};

 
if (msg:len >=  2048 ) {
    sl_send_reply
("513", "Message too big");
   
exit;
 
};

 
# we record-route all messages -- to make sure that
 
# subsequent messages will go through our proxy; that's
 
# particularly good if upstream and downstream entities
 
# use different transport protocol
 
if (!method=="REGISTER")
    record_route
();

 
# subsequent messages withing a dialog should take the
 
# path determined by record-routing
 
if (loose_route()) {
   
# mark routing logic in request
    append_hf
("P-hint: rr-enforced\r\n");
    route
(RELAY);
 
};

 
# tell the dialog module to monitor all the dialogs
 
if(method == "INVITE")
 
{
    setflag
(4);
 
}

   
if (!uri==myself) {
   
# mark routing logic in request
    append_hf
("P-hint: outbound\r\n");
   
# if you have some interdomain connections via TLS
   
#if(uri=~"@tls_domain1.net") {
   
#  t_relay("tls:domain1.net");
   
#  exit;
   
#} else if(uri=~"@tls_domain2.net") {
   
#  t_relay("tls:domain2.net");
   
#  exit;
   
#}
    route
(RELAY);
 
};

 
# if the request is for other domain use UsrLoc
 
# (in case, it does not work, use the following command
 
# with proper names and addresses in it)
 
if (uri==myself) {

   
if( is_method("PUBLISH|SUBSCRIBE|NOTIFY"))
      route
(PRESENCE);

   
if (method=="REGISTER") {

     
# Uncomment this if you want to use digest authentication
     
#if (!www_authorize("opensips.org", "subscriber")) {
     
#  www_challenge("opensips.org", "0");
     
#  exit;
     
#};

      save
("location");
     
exit;
   
};

   
# native SIP destinations are handled using our USRLOC DB
   
if (!lookup("location")) {
      sl_send_reply
("404", "Not Found");
     
exit;
   
};
    append_hf
("P-hint: usrloc applied\r\n");
 
};

  route
(RELAY);
}


route
[RELAY] {
 
# send it out now; use stateful forwarding as it works reliably
 
# even for UDP2TCP
 
if (!t_relay()) {
    sl_reply_error
();
 
};
 
exit;
}

route
[PRESENCE]
{
 
if ( !t_newtran() ){
    sl_reply_error
();
   
exit;
 
};

 
if(is_method("PUBLISH")){
    handle_publish
();
 
}
 
else
 
if( is_method("SUBSCRIBE")){
    handle_subscribe
();
 
}

 
exit;
}
to:
#
# OpenSIPS configuration file
#
# BLF , event:dialog
#

# ----------- global configuration parameters ------------------------


debug
=3            # debug level (cmd line: -dddddddddd)
fork
=yes
log_stderror
=yes

sip_warning
=0

check_via
=no  # (cmd. line: -v)
dns
=no          # (cmd. line: -r)
rev_dns
=no      # (cmd. line: -R)
listen
=udp:10.10.10.10:5060
children
=4


# ------------------ module loading ----------------------------------
mpath
= "/usr/local/lib/opensips/modules/"

loadmodule
"db_mysql.so"
loadmodule
"sl.so"
loadmodule
"maxfwd.so"
loadmodule
"textops.so"
loadmodule
"sipmsgops.so"
loadmodule
"tm.so"
loadmodule
"rr.so"
loadmodule
"dialog.so"
loadmodule
"presence.so"
loadmodule
"presence_dialoginfo.so"
loadmodule
"usrloc.so"
loadmodule
"registrar.so"
loadmodule
"pua.so"
loadmodule
"pua_dialoginfo.so"
loadmodule
"signaling.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "auth.so"
#loadmodule "auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --
modparam
("usrloc", "db_mode", 2)
modparam
("usrloc", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")

# -- dialog params --
modparam
("dialog", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- presence and presence_xml params --
modparam
("presence", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam
("presence", "server_address", "sip:sa@10.10.10.10:5060")

# -- pua params --
modparam
("pua", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- pua_dialoginfo params --
modparam
("pua_dialoginfo", "presence_server", "sip:sa@10.10.10.10:5060")

# -------------------------  request routing logic -------------------

# main routing logic


route
{

 
# initial sanity checks -- messages with
 
# max_forwards==0, or excessively long requests
 
if (!mf_process_maxfwd_header("10")) {
    sl_send_reply
("483","Too Many Hops");
   
exit;
 
};

 
if (msg:len >=  2048 ) {
    sl_send_reply
("513", "Message too big");
   
exit;
 
};

 
# we record-route all messages -- to make sure that
 
# subsequent messages will go through our proxy; that's
 
# particularly good if upstream and downstream entities
 
# use different transport protocol
 
if (!method=="REGISTER")
    record_route
();

 
# subsequent messages withing a dialog should take the
 
# path determined by record-routing
 
if (loose_route()) {
   
# mark routing logic in request
    append_hf
("P-hint: rr-enforced\r\n");
    route
(RELAY);
 
};

 
# tell the dialog module to monitor all the dialogs
 
if(method == "INVITE")
    create_dialog
();

   
if (!uri==myself) {
   
# mark routing logic in request
    append_hf
("P-hint: outbound\r\n");
   
# if you have some interdomain connections via TLS
   
#if(uri=~"@tls_domain1.net") {
   
#  t_relay("tls:domain1.net");
   
#  exit;
   
#} else if(uri=~"@tls_domain2.net") {
   
#  t_relay("tls:domain2.net");
   
#  exit;
   
#}
    route
(RELAY);
 
};

 
# if the request is for other domain use UsrLoc
 
# (in case, it does not work, use the following command
 
# with proper names and addresses in it)
 
if (uri==myself) {

   
if( is_method("PUBLISH|SUBSCRIBE|NOTIFY"))
      route
(PRESENCE);

   
if (method=="REGISTER") {

     
# Uncomment this if you want to use digest authentication
     
#if (!www_authorize("opensips.org", "subscriber")) {
     
#  www_challenge("opensips.org", "0");
     
#  exit;
     
#};

      save
("location");
     
exit;
   
};

   
# native SIP destinations are handled using our USRLOC DB
   
if (!lookup("location")) {
      sl_send_reply
("404", "Not Found");
     
exit;
   
};
    append_hf
("P-hint: usrloc applied\r\n");
 
};

  route
(RELAY);
}


route
[RELAY] {
 
# send it out now; use stateful forwarding as it works reliably
 
# even for UDP2TCP
 
if (!t_relay()) {
    sl_reply_error
();
 
};
 
exit;
}

route
[PRESENCE]
{
 
if ( !t_newtran() ){
    sl_reply_error
();
   
exit;
 
};

 
if(is_method("PUBLISH")){
    handle_publish
();
 
}
 
else
 
if( is_method("SUBSCRIBE")){
    handle_subscribe
();
 
}

 
exit;
}
June 17, 2014, at 07:47 PM by 89.120.101.121 -
Changed line 5 from:
#
# OpenSIPS configuration file
#
# BLF , event:dialog
#

# ----------- global configuration parameters ------------------------


debug
=3            # debug level (cmd line: -dddddddddd)
fork
=yes
log_stderror
=yes

sip_warning
=0

check_via
=no  # (cmd. line: -v)
dns
=no          # (cmd. line: -r)
rev_dns
=no      # (cmd. line: -R)
listen
=udp:10.10.10.10:5060
children
=4


# ------------------ module loading ----------------------------------
mpath
= "/usr/local/lib/opensips/modules/"

loadmodule
"db_mysql.so"
loadmodule
"sl.so"
loadmodule
"maxfwd.so"
loadmodule
"textops.so"
loadmodule
"tm.so"
loadmodule
"rr.so"
loadmodule
"dialog.so"
loadmodule
"presence.so"
loadmodule
"presence_dialoginfo.so"
loadmodule
"usrloc.so"
loadmodule
"registrar.so"
loadmodule
"pua.so"
loadmodule
"pua_dialoginfo.so"
loadmodule
"signaling.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "auth.so"
#loadmodule "auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --
modparam
("usrloc", "db_mode", 2)
modparam
("usrloc", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")

# -- dialog params --
modparam
("dialog", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- presence and presence_xml params --
modparam
("presence", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam
("presence", "server_address", "sip:sa@10.10.10.10:5060")

# -- pua params --
modparam
("pua", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- pua_dialoginfo params --
modparam
("pua_dialoginfo", "presence_server", "sip:sa@10.10.10.10:5060")

# -------------------------  request routing logic -------------------

# main routing logic


route
{

 
# initial sanity checks -- messages with
 
# max_forwards==0, or excessively long requests
 
if (!mf_process_maxfwd_header("10")) {
    sl_send_reply
("483","Too Many Hops");
   
exit;
 
};

 
if (msg:len >=  2048 ) {
    sl_send_reply
("513", "Message too big");
   
exit;
 
};

 
# we record-route all messages -- to make sure that
 
# subsequent messages will go through our proxy; that's
 
# particularly good if upstream and downstream entities
 
# use different transport protocol
 
if (!method=="REGISTER")
    record_route
();

 
# subsequent messages withing a dialog should take the
 
# path determined by record-routing
 
if (loose_route()) {
   
# mark routing logic in request
    append_hf
("P-hint: rr-enforced\r\n");
    route
(1);
 
};

 
# tell the dialog module to monitor all the dialogs
 
if(method == "INVITE")
 
{
    setflag
(4);
 
}

   
if (!uri==myself) {
   
# mark routing logic in request
    append_hf
("P-hint: outbound\r\n");
   
# if you have some interdomain connections via TLS
   
#if(uri=~"@tls_domain1.net") {
   
#  t_relay("tls:domain1.net");
   
#  exit;
   
#} else if(uri=~"@tls_domain2.net") {
   
#  t_relay("tls:domain2.net");
   
#  exit;
   
#}
    route
(1);
 
};

 
# if the request is for other domain use UsrLoc
 
# (in case, it does not work, use the following command
 
# with proper names and addresses in it)
 
if (uri==myself) {

   
if( is_method("PUBLISH|SUBSCRIBE|NOTIFY"))
      route
(2);

   
if (method=="REGISTER") {

     
# Uncomment this if you want to use digest authentication
     
#if (!www_authorize("opensips.org", "subscriber")) {
     
#  www_challenge("opensips.org", "0");
     
#  exit;
     
#};

      save
("location");
     
exit;
   
};

   
# native SIP destinations are handled using our USRLOC DB
   
if (!lookup("location")) {
      sl_send_reply
("404", "Not Found");
     
exit;
   
};
    append_hf
("P-hint: usrloc applied\r\n");
 
};

  route
(1);
}


route
[1] {
 
# send it out now; use stateful forwarding as it works reliably
 
# even for UDP2TCP
 
if (!t_relay()) {
    sl_reply_error
();
 
};
 
exit;
}

route
[2]
{
 
if ( !t_newtran() ){
    sl_reply_error
();
   
exit;
 
};

 
if(is_method("PUBLISH")){
    handle_publish
();
 
}
 
else
 
if( is_method("SUBSCRIBE")){
    handle_subscribe
();
 
}

 
exit;
}
to:
#
# OpenSIPS configuration file
#
# BLF , event:dialog
#

# ----------- global configuration parameters ------------------------


debug
=3            # debug level (cmd line: -dddddddddd)
fork
=yes
log_stderror
=yes

sip_warning
=0

check_via
=no  # (cmd. line: -v)
dns
=no          # (cmd. line: -r)
rev_dns
=no      # (cmd. line: -R)
listen
=udp:10.10.10.10:5060
children
=4


# ------------------ module loading ----------------------------------
mpath
= "/usr/local/lib/opensips/modules/"

loadmodule
"db_mysql.so"
loadmodule
"sl.so"
loadmodule
"maxfwd.so"
loadmodule
"textops.so"
loadmodule
"sipmsgops.so"
loadmodule
"tm.so"
loadmodule
"rr.so"
loadmodule
"dialog.so"
loadmodule
"presence.so"
loadmodule
"presence_dialoginfo.so"
loadmodule
"usrloc.so"
loadmodule
"registrar.so"
loadmodule
"pua.so"
loadmodule
"pua_dialoginfo.so"
loadmodule
"signaling.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "auth.so"
#loadmodule "auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --
modparam
("usrloc", "db_mode", 2)
modparam
("usrloc", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")

# -- dialog params --
modparam
("dialog", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- presence and presence_xml params --
modparam
("presence", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam
("presence", "server_address", "sip:sa@10.10.10.10:5060")

# -- pua params --
modparam
("pua", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- pua_dialoginfo params --
modparam
("pua_dialoginfo", "presence_server", "sip:sa@10.10.10.10:5060")

# -------------------------  request routing logic -------------------

# main routing logic


route
{

 
# initial sanity checks -- messages with
 
# max_forwards==0, or excessively long requests
 
if (!mf_process_maxfwd_header("10")) {
    sl_send_reply
("483","Too Many Hops");
   
exit;
 
};

 
if (msg:len >=  2048 ) {
    sl_send_reply
("513", "Message too big");
   
exit;
 
};

 
# we record-route all messages -- to make sure that
 
# subsequent messages will go through our proxy; that's
 
# particularly good if upstream and downstream entities
 
# use different transport protocol
 
if (!method=="REGISTER")
    record_route
();

 
# subsequent messages withing a dialog should take the
 
# path determined by record-routing
 
if (loose_route()) {
   
# mark routing logic in request
    append_hf
("P-hint: rr-enforced\r\n");
    route
(RELAY);
 
};

 
# tell the dialog module to monitor all the dialogs
 
if(method == "INVITE")
 
{
    setflag
(4);
 
}

   
if (!uri==myself) {
   
# mark routing logic in request
    append_hf
("P-hint: outbound\r\n");
   
# if you have some interdomain connections via TLS
   
#if(uri=~"@tls_domain1.net") {
   
#  t_relay("tls:domain1.net");
   
#  exit;
   
#} else if(uri=~"@tls_domain2.net") {
   
#  t_relay("tls:domain2.net");
   
#  exit;
   
#}
    route
(RELAY);
 
};

 
# if the request is for other domain use UsrLoc
 
# (in case, it does not work, use the following command
 
# with proper names and addresses in it)
 
if (uri==myself) {

   
if( is_method("PUBLISH|SUBSCRIBE|NOTIFY"))
      route
(PRESENCE);

   
if (method=="REGISTER") {

     
# Uncomment this if you want to use digest authentication
     
#if (!www_authorize("opensips.org", "subscriber")) {
     
#  www_challenge("opensips.org", "0");
     
#  exit;
     
#};

      save
("location");
     
exit;
   
};

   
# native SIP destinations are handled using our USRLOC DB
   
if (!lookup("location")) {
      sl_send_reply
("404", "Not Found");
     
exit;
   
};
    append_hf
("P-hint: usrloc applied\r\n");
 
};

  route
(RELAY);
}


route
[RELAY] {
 
# send it out now; use stateful forwarding as it works reliably
 
# even for UDP2TCP
 
if (!t_relay()) {
    sl_reply_error
();
 
};
 
exit;
}

route
[PRESENCE]
{
 
if ( !t_newtran() ){
    sl_reply_error
();
   
exit;
 
};

 
if(is_method("PUBLISH")){
    handle_publish
();
 
}
 
else
 
if( is_method("SUBSCRIBE")){
    handle_subscribe
();
 
}

 
exit;
}
June 17, 2014, at 07:41 PM by 89.120.101.121 -
Changed line 5 from:
#
# OpenSIPS configuration file
#
# BLF , event:dialog
#

# ----------- global configuration parameters ------------------------


debug
=3            # debug level (cmd line: -dddddddddd)
fork
=yes
log_stderror
=yes

sip_warning
=0

check_via
=no  # (cmd. line: -v)
dns
=no          # (cmd. line: -r)
rev_dns
=no      # (cmd. line: -R)
listen
=udp:10.10.10.10:5060
children
=4


# ------------------ module loading ----------------------------------
mpath
= "/usr/local/lib/opensips/modules/"

loadmodule
"db_mysql.so"
loadmodule
"sl.so"
loadmodule
"maxfwd.so"
loadmodule
"textops.so"
loadmodule
"tm.so"
loadmodule
"rr.so"
loadmodule
"dialog.so"
loadmodule
"presence.so"
loadmodule
"presence_dialoginfo.so"
loadmodule
"usrloc.so"
loadmodule
"registrar.so"
loadmodule
"pua.so"
loadmodule
"pua_dialoginfo.so"
loadmodule
"signaling.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "auth.so"
#loadmodule "auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --
modparam
("usrloc", "db_mode", 2)
modparam
("usrloc", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam
("rr", "enable_full_lr", 1)

# -- dialog params --
modparam
("dialog", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam
("dialog", "dlg_flag", 4)

# -- presence and presence_xml params --
modparam
("presence", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam
("presence", "server_address", "sip:sa@10.10.10.10:5060")

# -- pua params --
modparam
("pua", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- pua_dialoginfo params --
modparam
("pua_dialoginfo", "presence_server", "sip:sa@10.10.10.10:5060")

# -------------------------  request routing logic -------------------

# main routing logic


route
{

 
# initial sanity checks -- messages with
 
# max_forwards==0, or excessively long requests
 
if (!mf_process_maxfwd_header("10")) {
    sl_send_reply
("483","Too Many Hops");
   
exit;
 
};

 
if (msg:len >=  2048 ) {
    sl_send_reply
("513", "Message too big");
   
exit;
 
};

 
# we record-route all messages -- to make sure that
 
# subsequent messages will go through our proxy; that's
 
# particularly good if upstream and downstream entities
 
# use different transport protocol
 
if (!method=="REGISTER")
    record_route
();

 
# subsequent messages withing a dialog should take the
 
# path determined by record-routing
 
if (loose_route()) {
   
# mark routing logic in request
    append_hf
("P-hint: rr-enforced\r\n");
    route
(1);
 
};

 
# tell the dialog module to monitor all the dialogs
 
if(method == "INVITE")
 
{
    setflag
(4);
 
}

   
if (!uri==myself) {
   
# mark routing logic in request
    append_hf
("P-hint: outbound\r\n");
   
# if you have some interdomain connections via TLS
   
#if(uri=~"@tls_domain1.net") {
   
#  t_relay("tls:domain1.net");
   
#  exit;
   
#} else if(uri=~"@tls_domain2.net") {
   
#  t_relay("tls:domain2.net");
   
#  exit;
   
#}
    route
(1);
 
};

 
# if the request is for other domain use UsrLoc
 
# (in case, it does not work, use the following command
 
# with proper names and addresses in it)
 
if (uri==myself) {

   
if( is_method("PUBLISH|SUBSCRIBE|NOTIFY"))
      route
(2);

   
if (method=="REGISTER") {

     
# Uncomment this if you want to use digest authentication
     
#if (!www_authorize("opensips.org", "subscriber")) {
     
#  www_challenge("opensips.org", "0");
     
#  exit;
     
#};

      save
("location");
     
exit;
   
};

   
# native SIP destinations are handled using our USRLOC DB
   
if (!lookup("location")) {
      sl_send_reply
("404", "Not Found");
     
exit;
   
};
    append_hf
("P-hint: usrloc applied\r\n");
 
};

  route
(1);
}


route
[1] {
 
# send it out now; use stateful forwarding as it works reliably
 
# even for UDP2TCP
 
if (!t_relay()) {
    sl_reply_error
();
 
};
 
exit;
}

route
[2]
{
 
if ( !t_newtran() ){
    sl_reply_error
();
   
exit;
 
};

 
if(is_method("PUBLISH")){
    handle_publish
();
 
}
 
else
 
if( is_method("SUBSCRIBE")){
    handle_subscribe
();
 
}

 
exit;
}
to:
#
# OpenSIPS configuration file
#
# BLF , event:dialog
#

# ----------- global configuration parameters ------------------------


debug
=3            # debug level (cmd line: -dddddddddd)
fork
=yes
log_stderror
=yes

sip_warning
=0

check_via
=no  # (cmd. line: -v)
dns
=no          # (cmd. line: -r)
rev_dns
=no      # (cmd. line: -R)
listen
=udp:10.10.10.10:5060
children
=4


# ------------------ module loading ----------------------------------
mpath
= "/usr/local/lib/opensips/modules/"

loadmodule
"db_mysql.so"
loadmodule
"sl.so"
loadmodule
"maxfwd.so"
loadmodule
"textops.so"
loadmodule
"tm.so"
loadmodule
"rr.so"
loadmodule
"dialog.so"
loadmodule
"presence.so"
loadmodule
"presence_dialoginfo.so"
loadmodule
"usrloc.so"
loadmodule
"registrar.so"
loadmodule
"pua.so"
loadmodule
"pua_dialoginfo.so"
loadmodule
"signaling.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "auth.so"
#loadmodule "auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --
modparam
("usrloc", "db_mode", 2)
modparam
("usrloc", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")

# -- dialog params --
modparam
("dialog", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- presence and presence_xml params --
modparam
("presence", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam
("presence", "server_address", "sip:sa@10.10.10.10:5060")

# -- pua params --
modparam
("pua", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- pua_dialoginfo params --
modparam
("pua_dialoginfo", "presence_server", "sip:sa@10.10.10.10:5060")

# -------------------------  request routing logic -------------------

# main routing logic


route
{

 
# initial sanity checks -- messages with
 
# max_forwards==0, or excessively long requests
 
if (!mf_process_maxfwd_header("10")) {
    sl_send_reply
("483","Too Many Hops");
   
exit;
 
};

 
if (msg:len >=  2048 ) {
    sl_send_reply
("513", "Message too big");
   
exit;
 
};

 
# we record-route all messages -- to make sure that
 
# subsequent messages will go through our proxy; that's
 
# particularly good if upstream and downstream entities
 
# use different transport protocol
 
if (!method=="REGISTER")
    record_route
();

 
# subsequent messages withing a dialog should take the
 
# path determined by record-routing
 
if (loose_route()) {
   
# mark routing logic in request
    append_hf
("P-hint: rr-enforced\r\n");
    route
(1);
 
};

 
# tell the dialog module to monitor all the dialogs
 
if(method == "INVITE")
 
{
    setflag
(4);
 
}

   
if (!uri==myself) {
   
# mark routing logic in request
    append_hf
("P-hint: outbound\r\n");
   
# if you have some interdomain connections via TLS
   
#if(uri=~"@tls_domain1.net") {
   
#  t_relay("tls:domain1.net");
   
#  exit;
   
#} else if(uri=~"@tls_domain2.net") {
   
#  t_relay("tls:domain2.net");
   
#  exit;
   
#}
    route
(1);
 
};

 
# if the request is for other domain use UsrLoc
 
# (in case, it does not work, use the following command
 
# with proper names and addresses in it)
 
if (uri==myself) {

   
if( is_method("PUBLISH|SUBSCRIBE|NOTIFY"))
      route
(2);

   
if (method=="REGISTER") {

     
# Uncomment this if you want to use digest authentication
     
#if (!www_authorize("opensips.org", "subscriber")) {
     
#  www_challenge("opensips.org", "0");
     
#  exit;
     
#};

      save
("location");
     
exit;
   
};

   
# native SIP destinations are handled using our USRLOC DB
   
if (!lookup("location")) {
      sl_send_reply
("404", "Not Found");
     
exit;
   
};
    append_hf
("P-hint: usrloc applied\r\n");
 
};

  route
(1);
}


route
[1] {
 
# send it out now; use stateful forwarding as it works reliably
 
# even for UDP2TCP
 
if (!t_relay()) {
    sl_reply_error
();
 
};
 
exit;
}

route
[2]
{
 
if ( !t_newtran() ){
    sl_reply_error
();
   
exit;
 
};

 
if(is_method("PUBLISH")){
    handle_publish
();
 
}
 
else
 
if( is_method("SUBSCRIBE")){
    handle_subscribe
();
 
}

 
exit;
}
May 09, 2013, at 12:49 PM by 109.99.235.212 -
Added lines 1-5:

<-Back

Download

#
# OpenSIPS configuration file
#
# BLF , event:dialog
#

# ----------- global configuration parameters ------------------------


debug
=3            # debug level (cmd line: -dddddddddd)
fork
=yes
log_stderror
=yes

sip_warning
=0

check_via
=no  # (cmd. line: -v)
dns
=no          # (cmd. line: -r)
rev_dns
=no      # (cmd. line: -R)
listen
=udp:10.10.10.10:5060
children
=4


# ------------------ module loading ----------------------------------
mpath
= "/usr/local/lib/opensips/modules/"

loadmodule
"db_mysql.so"
loadmodule
"sl.so"
loadmodule
"maxfwd.so"
loadmodule
"textops.so"
loadmodule
"tm.so"
loadmodule
"rr.so"
loadmodule
"dialog.so"
loadmodule
"presence.so"
loadmodule
"presence_dialoginfo.so"
loadmodule
"usrloc.so"
loadmodule
"registrar.so"
loadmodule
"pua.so"
loadmodule
"pua_dialoginfo.so"
loadmodule
"signaling.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "auth.so"
#loadmodule "auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --
modparam
("usrloc", "db_mode", 2)
modparam
("usrloc", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam
("rr", "enable_full_lr", 1)

# -- dialog params --
modparam
("dialog", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam
("dialog", "dlg_flag", 4)

# -- presence and presence_xml params --
modparam
("presence", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam
("presence", "server_address", "sip:sa@10.10.10.10:5060")

# -- pua params --
modparam
("pua", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- pua_dialoginfo params --
modparam
("pua_dialoginfo", "presence_server", "sip:sa@10.10.10.10:5060")

# -------------------------  request routing logic -------------------

# main routing logic


route
{

 
# initial sanity checks -- messages with
 
# max_forwards==0, or excessively long requests
 
if (!mf_process_maxfwd_header("10")) {
    sl_send_reply
("483","Too Many Hops");
   
exit;
 
};

 
if (msg:len >=  2048 ) {
    sl_send_reply
("513", "Message too big");
   
exit;
 
};

 
# we record-route all messages -- to make sure that
 
# subsequent messages will go through our proxy; that's
 
# particularly good if upstream and downstream entities
 
# use different transport protocol
 
if (!method=="REGISTER")
    record_route
();

 
# subsequent messages withing a dialog should take the
 
# path determined by record-routing
 
if (loose_route()) {
   
# mark routing logic in request
    append_hf
("P-hint: rr-enforced\r\n");
    route
(1);
 
};

 
# tell the dialog module to monitor all the dialogs
 
if(method == "INVITE")
 
{
    setflag
(4);
 
}

   
if (!uri==myself) {
   
# mark routing logic in request
    append_hf
("P-hint: outbound\r\n");
   
# if you have some interdomain connections via TLS
   
#if(uri=~"@tls_domain1.net") {
   
#  t_relay("tls:domain1.net");
   
#  exit;
   
#} else if(uri=~"@tls_domain2.net") {
   
#  t_relay("tls:domain2.net");
   
#  exit;
   
#}
    route
(1);
 
};

 
# if the request is for other domain use UsrLoc
 
# (in case, it does not work, use the following command
 
# with proper names and addresses in it)
 
if (uri==myself) {

   
if( is_method("PUBLISH|SUBSCRIBE|NOTIFY"))
      route
(2);

   
if (method=="REGISTER") {

     
# Uncomment this if you want to use digest authentication
     
#if (!www_authorize("opensips.org", "subscriber")) {
     
#  www_challenge("opensips.org", "0");
     
#  exit;
     
#};

      save
("location");
     
exit;
   
};

   
# native SIP destinations are handled using our USRLOC DB
   
if (!lookup("location")) {
      sl_send_reply
("404", "Not Found");
     
exit;
   
};
    append_hf
("P-hint: usrloc applied\r\n");
 
};

  route
(1);
}


route
[1] {
 
# send it out now; use stateful forwarding as it works reliably
 
# even for UDP2TCP
 
if (!t_relay()) {
    sl_reply_error
();
 
};
 
exit;
}

route
[2]
{
 
if ( !t_newtran() ){
    sl_reply_error
();
   
exit;
 
};

 
if(is_method("PUBLISH")){
    handle_publish
();
 
}
 
else
 
if( is_method("SUBSCRIBE")){
    handle_subscribe
();
 
}

 
exit;
}

Page last modified on July 02, 2014, at 02:04 PM