openSIPS | Documentation / Tutorials-Presence-PuaXmppConfig

July 02, 2014, at 02:50 PM by 89.120.101.121 -

Deleted lines 188-192:

# make pua_usrloc send PUBLISH for phones which do not support
# presence filter after User-Agent header
if ( $hdr("User-Agent")!~"X-Lite" )
pua_set_publish();

July 02, 2014, at 02:28 PM by 89.120.101.121 -

Deleted line 35:

alias="sip.domain.com"

July 02, 2014, at 02:26 PM by 89.120.101.121 -

Changed lines 1-5 from:

[[Documentation/Tutorials-PUAExtensions#pua_xmpp | <-Back]]

[[http://opensips.org/uploads/Resources/opensips_xmpp.cfg| Download]]

<pre># OpenSIPS SIP-XMPP Gateway debug=3 log_stderror=no log_facility=LOG_LOCAL0 fork=yes children=4 listen=udp:10.10.10.10:5060 alias="sip.domain.com" # ------------------ module loading ---------------------------------- mpath="/usr/local/lib/opensips/modules/" loadmodule "db_mysql.so" loadmodule "textops.so" loadmodule "maxfwd.so" loadmodule "rr.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "signaling.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "mi_fifo.so" loadmodule "uri.so" loadmodule "xmpp.so" loadmodule "pua.so" loadmodule "pua_xmpp.so" loadmodule "presence.so" loadmodule "presence_xml.so" # ----------------- setting module-specific parameters --------------- modparam("usrloc|presence|presence_xml|pua", "db_url",  "mysql://opensips:opensipsrw@localhost/opensips") modparam("presence|pua_xmpp", "server_address", "sip:sa@10.10.10.10:5060") modparam("presence_xml", "force_active", 1) modparam("pua_xmpp", "presence_server", "sip:sa@10.10.10.10:5060") modparam("xmpp", "xmpp_domain", "sip.domain.com")  # the name that OpenSIPS will register with as a component to the jabber server modparam("xmpp", "xmpp_host", "xmpp.domain.com")   # the location of the jabber server modparam("xmpp", "sip_domain", "sip.domain.com")   # the domain of the sip users visible to the xmpp users modparam("xmpp", "backend", "component") modparam("xmpp", "outbound_proxy", "sip:10.10.10.10:5060") modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo") modparam("usrloc", "db_mode", 2) route {     if (!mf_process_maxfwd_header("10")) {         sl_send_reply("483","Too Many Hops");         exit;     }     if (has_totag()) {         # sequential request withing a dialog should         # take the path determined by record-routing         if (loose_route()) {             if (is_method("BYE")) {                 setflag(1); # do accounting ...                 setflag(3); # ... even if the transaction fails             } else if (is_method("INVITE")) {                 # even if in most of the cases is useless, do RR for                 # re-INVITEs alos, as some buggy clients do change route set                 # during the dialog.                 record_route();             }             # route it out to whatever destination was set by loose_route()             # in $du (destination URI).             route(1);         } else {             /* uncomment the following lines if you want to enable presence */             if (is_method("SUBSCRIBE|NOTIFY")) {             ##  # in-dialog subscribe requests                 route(2);                 exit;             }             if ( is_method("ACK") ) {                 if ( t_check_trans() ) {                     # non loose-route, but stateful ACK; must be an ACK after                     # a 487 or e.g. 404 from upstream server                     t_relay();                     exit;                 } else {                     # ACK without matching transaction ->                     # ignore and discard                     exit;                 }             }             sl_send_reply("404","Not here");         }         exit;     }     #initial requests     # CANCEL processing     if (is_method("CANCEL"))     {         if (t_check_trans())             t_relay();         exit;     }     t_check_trans();     # authenticate if from local subscriber (uncomment to enable auth)     # authenticate all initial non-REGISTER request that pretend to be     # generated by local subscriber (domain from FROM URI is local)     ##if (!(method=="REGISTER") && from_uri==myself) /*no multidomain version*/     ##if (!(method=="REGISTER") && is_from_local())  /*multidomain version*/     ##{     ##  if (!proxy_authorize("", "subscriber")) {     ##      proxy_challenge("", "0");     ##      exit;     ##  }     ##  if (!db_check_from()) {     ##      sl_send_reply("403","Forbidden auth ID");     ##      exit;     ##  }     ##     ##  consume_credentials();     ##  # caller authenticated     ##}     # preloaded route checking     if (loose_route()) {         xlog("L_ERR",         "Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");         if (!is_method("ACK"))             sl_send_reply("403","Preload Route denied");         exit;     }       # handle initial presence messages     if(uri==myself || uri=~"sip:.+gmail.com" || uri=~"sip:.+@xmpp.domain.com") # detect if it's for an XMPP user     {         if( is_method("PUBLISH|SUBSCRIBE"))             route(2);     };     # handle xmpp messages     if(is_method("MESSAGE") && (uri=~"sip:.+gmail.com" || uri=~"sip:.+@xmpp.domain.com"))     {         if(!t_newtran())         {             sl_reply_error();             exit;         }         if (xmpp_send_message()) {             t_reply("200", "Accepted");         } else {             t_reply("404", "Not found");         }         exit;     };     # record routing     if (!is_method("REGISTER|MESSAGE"))         record_route();     # account only INVITEs     if (is_method("INVITE")) {         setflag(1); # do accounting     }     if (!uri==myself)     ## replace with following line if multi-domain support is used     ##if (!is_uri_host_local())     {         append_hf("P-hint: outbound\r\n");         # if you have some interdomain connections via TLS         ##if($rd=="tls_domain1.net") {         ##  t_relay("tls:domain1.net");         ##  exit;         ##} else if($rd=="tls_domain2.net") {         ##  t_relay("tls:domain2.net");         ##  exit;         ##}         route(1);     }     # requests for my domain     if (is_method("REGISTER"))     {         # authenticate the REGISTER requests (uncomment to enable auth)         ##if (!www_authorize("", "subscriber"))         ##{         ##  www_challenge("", "0");         ##  exit;         ##}         ##         ##if (!db_check_to())         ##{         ##  sl_send_reply("403","Forbidden auth ID");         ##  exit;         ##}         if (!save("location"))             sl_reply_error();         exit;     }     if ($rU==NULL) {         # request with no Username in RURI         sl_send_reply("484","Address Incomplete");         exit;     }     # apply DB based aliases (uncomment to enable)     ##alias_db_lookup("dbaliases");     # do lookup with method filtering     if (!lookup("location","m")) {         switch ($retcode) {             case -1:             case -3:                 t_newtran();                 t_reply("404", "Not Found");                 exit;             case -2:                 sl_send_reply("405", "Method Not Allowed");                 exit;         }     }     # when routing via usrloc, log the missed calls also     setflag(2);     route(1); } route[1] {     # send it out now; use stateful forwarding as it works reliably     # even for UDP2TCP     if (!t_relay()) {         sl_reply_error();     };     exit; } route[2] {     # create new transaction to catch retransmissions     if(!t_newtran())     {         sl_reply_error();         exit;     }     # if it is Notify - for xmpp gateway     if( is_method("NOTIFY"))     {         t_reply("200", "OK");         pua_xmpp_notify();         exit;     }     # handle presence specific messages     if(is_method("PUBLISH"))     {         handle_publish();     }     else     if(is_method("SUBSCRIBE"))     {         handle_subscribe();         if($hdr(Event)== "presence" && (uri=~"sip:.+gmail.com" || uri=~"sip:.+@xmpp.domain.com") )             pua_xmpp_req_winfo("$ruri", "$hdr(Expires)");     }     exit; }     </pre>

to:

!!!!! Documentation -> [[Documentation.Tutorials | Tutorials ]] -> [[Documentation/Tutorials-Presence | Presence]] -> [[Documentation/Tutorials-PUAExtensions#pua_xmpp|Presence User Agent Extensions]] -> SIMPLE SIP-to-XMPP gateway

\\

[@
#
# OpenSIPS 1.11.x configuration file
#
# SIP to XMPP Gateway + SIP Presence Server
#

# ----------- global configuration parameters ------------------------

debug=3
fork=yes
log_stderror=no

check_via=no
dns=no
rev_dns=no

listen=udp:10.10.10.10:5060
children=2

alias="sip.domain.com"

# ------------------ module loading ----------------------------------
mpath="/usr/local/opensips/lib/modules/"

loadmodule "db_mysql.so"
loadmodule "sl.so"
loadmodule "signaling.so"
loadmodule "tm.so"
loadmodule "maxfwd.so"
alias="sip.domain.com"
loadmodule "textops.so"
loadmodule "sipmsgops.so"
loadmodule "rr.so"
loadmodule "mi_fifo.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "presence.so"
loadmodule "presence_xml.so"
loadmodule "xmpp.so"
loadmodule "pua.so"
loadmodule "pua_xmpp.so"

# Uncomment this if you want digest authentication
#loadmodule "auth.so"
#loadmodule "auth_db.so"

# ----------------- setting module-specific parameters ---------------
modparam("mi_fifo","fifo_name","/tmp/opensips_fifo")

# -- usrloc params --
modparam("usrloc","db_mode",2)
modparam("usrloc","db_url","mysql://opensips:opensipsrw@localhost/opensips")

# -- auth params --
# Uncomment if you are using auth module
#modparam("auth_db", "calculate_ha1", yes)
#modparam("auth_db", "password_column", "password")

# -- presence params --
modparam("presence|presence_xml","db_url","mysql://opensips:opensipsrw@localhost/opensips")
modparam("presence","server_address","sip:sa@10.10.10.10:5060")
modparam("presence_xml","force_active",1)

# -- pua and pua_xmpp parameters --
modparam("pua","db_url","mysql://opensips:opensipsrw@localhost/opensips")
modparam("pua_xmpp","default_domain","10.10.10.10")

# -- xmpp parameters --
# the name that OpenSIPS will register with as a component to the jabber server
modparam("xmpp", "xmpp_domain", "sip.domain.com")
# the location of the jabber server
modparam("xmpp", "xmpp_host", "xmpp.domain.com")
# the domain of the sip users visible to the xmpp users
modparam("xmpp", "sip_domain", "sip.domain.com")
modparam("xmpp", "backend", "component")
modparam("xmpp", "outbound_proxy", "sip:10.10.10.10:5060")

# ------------------------- request routing logic -------------------

# main routing logic
route{

# initial sanity checks
if(!mf_process_maxfwd_header("10")) {
send_reply("483","Too Many Hops");
exit;
}

if (has_totag()) {
# sequential requests within a dialog should
# take the path determined by record-routing
if (loose_route()) {
# route it out to whatever destination was set by loose_route()
# in $du (destination URI).
route(relay);
} else {
if (is_method("SUBSCRIBE|NOTIFY") && uri==myself) {
# in-dialog subscribe requests
route(handle_presence);
exit;
} else if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but stateful ACK; must be an ACK after
# a 487 or e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction ->
# ignore and discard
exit;
}
}
send_reply("404","Not here");
}
exit;
}

# CANCEL processing
if (is_method("CANCEL")) {
if (t_check_trans())
t_relay();
exit;
}

t_check_trans();

# authenticate if from local subscriber (uncomment to enable auth)
# authenticate all initial non-REGISTER request that pretend to be
# generated by local subscriber (domain from FROM URI is local)
##if (!(method=="REGISTER") && from_uri==myself) {
## if (!proxy_authorize("", "subscriber")) {
## proxy_challenge("", "0");
## exit;
## }
## if (!db_check_from()) {
## send_reply("403","Forbidden auth ID");
## exit;
## }
##
## consume_credentials();
##}

# SIP to XMPP traffic (to an XMPP user)
if ( ($rd=~".+gmail.com$" || $rd=="xmpp.domain.com") ) {
# handle initial presence messages
if ( is_method("PUBLISH|SUBSCRIBE") )
route(handle_presence);

# handle xmpp messages
if (is_method("MESSAGE") ) {
t_newtran();
if (xmpp_send_message()) {
t_reply("200", "Accepted");
} else {
t_reply("404", "Not found");
}
exit;
}
} # SIP 2 XMPP

# record routing
if (!is_method("REGISTER|MESSAGE"))
record_route();

if (uri!=myself) {
# routing to other SIP domains
route(relay);
}

# SIP 2 SIP presence traffic
if (is_method("PUBLISH|SUBSCRIBE")) {
route(handle_presence);
exit;
}

if (is_method("REGISTER")) {

# Uncomment this if you want to use digest authentication
#if (!www_authorize("", "subscriber")) {
# www_challenge("", "0");
# exit;
#}

# make pua_usrloc send PUBLISH for phones which do not support
# presence filter after User-Agent header
if ( $hdr("User-Agent")!~"X-Lite" )
pua_set_publish();

save("location");
exit;
}

# native SIP destinations are handled using our USRLOC DB
if(!lookup("location")) {
send_reply("404","Not Found");
exit;
}

route(relay);
}

route[relay]{
# send it out
if(!t_relay())
sl_reply_error();

exit;
}

route[handle_presence]
{
if(!t_newtran()){
sl_reply_error();
exit;
}

# if it is NOTIFY - for xmpp gateway
if( is_method("NOTIFY")) {
t_reply("200", "OK");
pua_xmpp_notify();
} else

if (is_method("PUBLISH")) {
handle_publish();
} else

if (is_method("SUBSCRIBE")) {
handle_subscribe();
if( $hdr(Event)== "presence" &&
($rd=~".+gmail.com$" || $rd=="xmpp.domain.com") )
pua_xmpp_req_winfo("$ru", "$hdr(Expires)");
}

exit;
}
@]

May 09, 2013, at 01:47 PM by 109.99.235.212 -

Added lines 1-5:

[[Documentation/Tutorials-PUAExtensions#pua_xmpp | <-Back]]

[[http://opensips.org/uploads/Resources/opensips_xmpp.cfg| Download]]

<pre># OpenSIPS SIP-XMPP Gateway debug=3 log_stderror=no log_facility=LOG_LOCAL0 fork=yes children=4 listen=udp:10.10.10.10:5060 alias="sip.domain.com" # ------------------ module loading ---------------------------------- mpath="/usr/local/lib/opensips/modules/" loadmodule "db_mysql.so" loadmodule "textops.so" loadmodule "maxfwd.so" loadmodule "rr.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "signaling.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "mi_fifo.so" loadmodule "uri.so" loadmodule "xmpp.so" loadmodule "pua.so" loadmodule "pua_xmpp.so" loadmodule "presence.so" loadmodule "presence_xml.so" # ----------------- setting module-specific parameters --------------- modparam("usrloc|presence|presence_xml|pua", "db_url",  "mysql://opensips:opensipsrw@localhost/opensips") modparam("presence|pua_xmpp", "server_address", "sip:sa@10.10.10.10:5060") modparam("presence_xml", "force_active", 1) modparam("pua_xmpp", "presence_server", "sip:sa@10.10.10.10:5060") modparam("xmpp", "xmpp_domain", "sip.domain.com")  # the name that OpenSIPS will register with as a component to the jabber server modparam("xmpp", "xmpp_host", "xmpp.domain.com")   # the location of the jabber server modparam("xmpp", "sip_domain", "sip.domain.com")   # the domain of the sip users visible to the xmpp users modparam("xmpp", "backend", "component") modparam("xmpp", "outbound_proxy", "sip:10.10.10.10:5060") modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo") modparam("usrloc", "db_mode", 2) route {     if (!mf_process_maxfwd_header("10")) {         sl_send_reply("483","Too Many Hops");         exit;     }     if (has_totag()) {         # sequential request withing a dialog should         # take the path determined by record-routing         if (loose_route()) {             if (is_method("BYE")) {                 setflag(1); # do accounting ...                 setflag(3); # ... even if the transaction fails             } else if (is_method("INVITE")) {                 # even if in most of the cases is useless, do RR for                 # re-INVITEs alos, as some buggy clients do change route set                 # during the dialog.                 record_route();             }             # route it out to whatever destination was set by loose_route()             # in $du (destination URI).             route(1);         } else {             /* uncomment the following lines if you want to enable presence */             if (is_method("SUBSCRIBE|NOTIFY")) {             ##  # in-dialog subscribe requests                 route(2);                 exit;             }             if ( is_method("ACK") ) {                 if ( t_check_trans() ) {                     # non loose-route, but stateful ACK; must be an ACK after                     # a 487 or e.g. 404 from upstream server                     t_relay();                     exit;                 } else {                     # ACK without matching transaction ->                     # ignore and discard                     exit;                 }             }             sl_send_reply("404","Not here");         }         exit;     }     #initial requests     # CANCEL processing     if (is_method("CANCEL"))     {         if (t_check_trans())             t_relay();         exit;     }     t_check_trans();     # authenticate if from local subscriber (uncomment to enable auth)     # authenticate all initial non-REGISTER request that pretend to be     # generated by local subscriber (domain from FROM URI is local)     ##if (!(method=="REGISTER") && from_uri==myself) /*no multidomain version*/     ##if (!(method=="REGISTER") && is_from_local())  /*multidomain version*/     ##{     ##  if (!proxy_authorize("", "subscriber")) {     ##      proxy_challenge("", "0");     ##      exit;     ##  }     ##  if (!db_check_from()) {     ##      sl_send_reply("403","Forbidden auth ID");     ##      exit;     ##  }     ##     ##  consume_credentials();     ##  # caller authenticated     ##}     # preloaded route checking     if (loose_route()) {         xlog("L_ERR",         "Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");         if (!is_method("ACK"))             sl_send_reply("403","Preload Route denied");         exit;     }       # handle initial presence messages     if(uri==myself || uri=~"sip:.+gmail.com" || uri=~"sip:.+@xmpp.domain.com") # detect if it's for an XMPP user     {         if( is_method("PUBLISH|SUBSCRIBE"))             route(2);     };     # handle xmpp messages     if(is_method("MESSAGE") && (uri=~"sip:.+gmail.com" || uri=~"sip:.+@xmpp.domain.com"))     {         if(!t_newtran())         {             sl_reply_error();             exit;         }         if (xmpp_send_message()) {             t_reply("200", "Accepted");         } else {             t_reply("404", "Not found");         }         exit;     };     # record routing     if (!is_method("REGISTER|MESSAGE"))         record_route();     # account only INVITEs     if (is_method("INVITE")) {         setflag(1); # do accounting     }     if (!uri==myself)     ## replace with following line if multi-domain support is used     ##if (!is_uri_host_local())     {         append_hf("P-hint: outbound\r\n");         # if you have some interdomain connections via TLS         ##if($rd=="tls_domain1.net") {         ##  t_relay("tls:domain1.net");         ##  exit;         ##} else if($rd=="tls_domain2.net") {         ##  t_relay("tls:domain2.net");         ##  exit;         ##}         route(1);     }     # requests for my domain     if (is_method("REGISTER"))     {         # authenticate the REGISTER requests (uncomment to enable auth)         ##if (!www_authorize("", "subscriber"))         ##{         ##  www_challenge("", "0");         ##  exit;         ##}         ##         ##if (!db_check_to())         ##{         ##  sl_send_reply("403","Forbidden auth ID");         ##  exit;         ##}         if (!save("location"))             sl_reply_error();         exit;     }     if ($rU==NULL) {         # request with no Username in RURI         sl_send_reply("484","Address Incomplete");         exit;     }     # apply DB based aliases (uncomment to enable)     ##alias_db_lookup("dbaliases");     # do lookup with method filtering     if (!lookup("location","m")) {         switch ($retcode) {             case -1:             case -3:                 t_newtran();                 t_reply("404", "Not Found");                 exit;             case -2:                 sl_send_reply("405", "Method Not Allowed");                 exit;         }     }     # when routing via usrloc, log the missed calls also     setflag(2);     route(1); } route[1] {     # send it out now; use stateful forwarding as it works reliably     # even for UDP2TCP     if (!t_relay()) {         sl_reply_error();     };     exit; } route[2] {     # create new transaction to catch retransmissions     if(!t_newtran())     {         sl_reply_error();         exit;     }     # if it is Notify - for xmpp gateway     if( is_method("NOTIFY"))     {         t_reply("200", "OK");         pua_xmpp_notify();         exit;     }     # handle presence specific messages     if(is_method("PUBLISH"))     {         handle_publish();     }     else     if(is_method("SUBSCRIBE"))     {         handle_subscribe();         if($hdr(Event)== "presence" && (uri=~"sip:.+gmail.com" || uri=~"sip:.+@xmpp.domain.com") )             pua_xmpp_req_winfo("$ruri", "$hdr(Expires)");     }     exit; }     </pre>

Documentation.Tutorials-Presence-PuaXmppConfig History