Copyright © 2006 voice-system.ro
Copyright © 2008 Klaus Darilion IPCom
|Revision $Revision: 5886 $||$Date: 2009-07-16 12:54:34 +0200 (Thu, 16 Jul 2009) $|
Table of Contents
List of Examples
The pua_dialoginfo retrieves dialog state information from the dialog module and PUBLISHes the dialog-information using the pua module. Thus, in combination with the presence_xml module this can be used to derive dialog-info from the dialog module and NOTIFY the subscribed watchers about dialog-info changes. This can be used for example with SNOM and Linksys phones.
Note: This implements dialog-info according to RFC 4235 and is not compatible with the BLA feature defined in draft-anil-sipping-bla-03.txt. (Actually the BLA draft is really crap as it changes SIP semantics)
The module is based on code (copy/paste) from pua_usrloc and nat_traversal module.
Following you will show some examples of an dialog-info XML document taken from RFC 4235. This will help you to understand the meaning of the module parameters:
<?xml version="1.0"?> <dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="1" state="full" entity="sip:email@example.com"> <dialog id="as7d900as8" call-id="a84b4c76e66710" local-tag="1928301774" remote-tag="456887766" direction="initiator"> <state>early</state> </dialog> </dialog-info>
The root element is the "dialog-info". It contains the namespace, the version (which must be incremented for each new PUBLISH for this certain dialog), the state (this module only supports state=full) and the entity for which we publish the dialog-info.
The "dialog" element must contain an id parameter. The id parameter is usually different to the optional call-id parameter (which is the call-id of the INVITE request) as an INVITE can create multiple dialogs (forked request). But as the dialog module does not support multiple dialogs created by a single transaction, the pua_dialoginfo module sets the id parameter to the same value as the call-id parameter. The "local-tag" indicates the local tag of the entity. The remote-tag indicates the tag of the remote party. The "direction" indicates if the entity was the initator of the dialog or the recepient (aka if the entity sent or received the first INVITE).
The "state" element describes the state of the dialog state machine and must be either: trying, proceeding, early, confirmed or terminated.
The dialog element can contain optional "local" and "remote" elements which decsribes the local and the remote party in more detail, for example:
<?xml version="1.0" encoding="UTF-8"?> <dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="1" state="full"> <dialog id="as7d900as8" call-id="a84b4c76e66710" local-tag="1928301774" remote-tag="456887766" direction="initiator"> <state>early</state> <local> <identity display="Alice">sip:firstname.lastname@example.org</identity> <target uri="sip:email@example.com"/> </local> <remote> <identity display="Bob">sip:firstname.lastname@example.org</identity> <target uri="sip:email@example.com"/> </remote> </dialog> </dialog-info>
The local and remote elements are needed to implement call pickup. For example if the above XML document is received by somebody who SUBSCRIBEd the dialog-info of Alice, then it can pick-up the call by sending an INVITE to Bob (actually I am not sure if it should use the URI in the identity element or the URI in the target parameter) which contains a Replaces header which contains the call-id and the tags. This was tested sucessfully with Linksys SPA962 phones and with SNOM 320 Firmware 7.3.7 (you have to set the function key to "Extension").
A dialog-info XML document may contain multiple "dialog" elements, for example if the entity has multiple ongoing dialogs. For example the following XML document shows a confirmed dialog and an early (probably a second incoming call) dialog.
<?xml version="1.0"?> <dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="3" state="full" entity="sip:firstname.lastname@example.org"> <dialog id="as7d900as8" call-id="a84b4c76e66710" local-tag="1928301774" remote-tag="hh76a" direction="initiator"> <state>confirmed</state> </dialog> <dialog id="j7zgt54" call-id="ASDRRVASDRF" local-tag="123456789" remote-tag="EE345" direction="recipient"> <state>early</state> </dialog> </dialog-info>
As the dialog module callbacks only address a certain dialog, the pua_dialoginfo always PUBLISHes XML documents with a single "dialog" element. If an entity has multiple concurrent dialogs, the pua_dialoginfo module will send PUBLISH for each dialog. These multiple "presenties" can be aggregated by the presence_dialoginfo module into a single XML document with multiple "dialog" elements. Please see the description of the presence_dialoginfo module for details about the aggregation.
If there are problems with the callbacks from dialog module and you want to debug them you define PUA_DIALOGINFO_DEBUG in pua_dialoginfo.c and recompile.
The module tries to find out if the entity is a local user. Only PUBLISH to local user are sent. Therefore, the module needs to find out if the domain is a local one or not. It uses the same mechanism as the "==myself" mechanism. Thus, all domains have to be declared with the "alias=..." option in OpenSIPS.cfg. DB-based multidomain support as offered by "domain" module is not supported yet. Conclusion: The module has the same "domain" problems as the "rr" module.
The module puts the call-id of the dialog into an XML parameter. Thus, if the call-id contains quotes, they should be escaped. This is not yet implemented. Thus, if the call-id contains quotes the XML document will be invalid.
The module derives the AoR of the callee from the To: header. Thus, if the To header does not contain the canonical AoR the PUBLISH might have the wrong SIP URI in the RURI and the entity parameter.
If this parameter is set, the optional call-id will be put into the dialog element. This is needed for call-pickup features.
Default value is “1”.
If this parameter is set, the local and remote tag will be put into the dialog element. This is needed for call-pickup features.
Default value is “1”.
If this parameter is set, the optional local and remote elements will be put into the dialog element. This is needed for call-pickup features.
Default value is “1”.
Example 1.3. Set
... modparam("pua_dialoginfo", "include_localremote", 0) ...
Usually the dialog-info of the caller will be "trying -> early -> confirmed" and the dialog-info of the callee will be "early -> confirmed". On some phones the function LED will start blinking if the state is early, regardless if is is the caller or the callee (indicated with the "direction" parameter). To avoid blinking LEDs for the caller, you can enable this parameter. Then the state of the caller will be singaled as "confirmed" even in "early" state. This is a workaround for the buggy Linksys SPA962 phones. SNOM phones work well with the default setting.
Default value is “0”.
Example 1.4. Set
... modparam("pua_dialoginfo", "caller_confirmed", 1) ...