UAC Module

Bogdan-Andrei Iancu

Ramona-Elena Modroiu

Edited by

Bogdan-Andrei Iancu

Edited by

Ramona-Elena Modroiu

Revision History
Revision $Revision: 8742 $$Date: 2012-02-22 18:34:34 +0100 (Wed, 22 Feb 2012) $

Table of Contents

1. Admin Guide
1.1. Overview
1.2. Dependencies
1.2.1. OpenSIPS Modules
1.2.2. External Libraries or Applications
1.3. Exported Parameters
1.3.1. restore_mode (string)
1.3.2. restore_passwd (string)
1.3.3. rr_from_store_param (string)
1.3.4. rr_to_store_param (string)
1.3.5. auth_realm_avp (string)
1.3.6. auth_username_avp (string)
1.3.7. auth_password_avp (string)
1.3.8. force_dialog (int)
1.4. Exported Functions
1.4.1. uac_replace_from(display,uri) uac_replace_to(display,uri)
1.4.2. uac_replace_from(uri) uac_replace_to(uri)
1.4.3. uac_restore_from() uac_restore_to()
1.4.4. uac_auth()

List of Examples

1.1. Set restore_mode parameter
1.2. Set restore_passwd parameter
1.3. Set rr_from_store_param parameter
1.4. Set rr_to_store_param parameter
1.5. Set auth_realm_avp parameter
1.6. Set auth_username_avp parameter
1.7. Set auth_password_avp parameter
1.8. Set force_dialog parameter
1.9. uac_replace_from/uac_replace_to usage
1.10. uac_replace_from/uac_replace_to usage
1.11. uac_restore_from/uac_restore_to usage
1.12. uac_auth usage

Chapter 1. Admin Guide

1.1. Overview

UAC (User Agent Client) module provides some basic UAC functionalities like FROM / TO header manipulation (anonymization) or client authentication.

If the dialog module is loaded and a dialog can be created, then the auto mode can be done more efficiently.

Known limitations in this version:

  • authentication does not support qop auth-int, just qop auth;

  • CSeq not increased during authentication - the response may be rejected.

1.2. Dependencies

1.2.1. OpenSIPS Modules

The following modules must be loaded before this module:

  • TM - Transaction Module.

  • RR - Record-Route Module, but only if restore mode for FROM URI is set to “auto”.

  • UAC_AUTH - UAC Authentication Module.

  • Dialog Module, if “force_dialog” module parameter is enabled, or a dialog is created from the configuration script.

1.2.2. External Libraries or Applications

The following libraries or applications must be installed before running OpenSIPS with this module loaded:

  • None

1.3. Exported Parameters

1.3.1. restore_mode (string)

There are 3 mode of restoring the original headers (FROM/TO) URI:

  • none” - no information about original URI is stored; restoretion is not possible.

  • manual” - all following replies will be restored, but not also the sequential requests - this must be manually updated based on original URI.

  • auto” - all sequential requests and replies will be automatically updated based on stored original URI.

This parameter is optional, it's default value being “auto”.

Example 1.1. Set restore_mode parameter

...
modparam("uac","restore_mode","auto")
...
				

1.3.2. restore_passwd (string)

String password to be used to encrypt the RR storing paramter (when replacing the TO/FROM headers). If empty, no encryption will be used.

Default value of this parameter is empty.

Example 1.2. Set restore_passwd parameter

...
modparam("uac","restore_passwd","my_secret_passwd")
...
				

1.3.3. rr_from_store_param (string)

Name of Record-Route header parameter that will be used to store (encoded) the original FROM URI.

This parameter is optional, it's default value being “vsf”.

Example 1.3. Set rr_from_store_param parameter

...
modparam("uac","rr_from_store_param","my_Fparam")
...
				

1.3.4. rr_to_store_param (string)

Name of Record-Route header parameter that will be used to store (encoded) the original TO URI.

This parameter is optional, it's default value being “vst”.

Example 1.4. Set rr_to_store_param parameter

...
modparam("uac","rr_to_store_param","my_Tparam")
...
				

1.3.5. auth_realm_avp (string)

The definition of an AVP that might contain the realm to be used to perform authentication.

If you define it, you also need to define “auth_username_avp” (Section 1.3.6, “auth_username_avp (string)”) and “auth_username_avp” (Section 1.3.7, “auth_password_avp (string)”).

Example 1.5. Set auth_realm_avp parameter

...
modparam("uac","auth_realm_avp","$avp(10)")
...
				

1.3.6. auth_username_avp (string)

The definition of an AVP that might contain the username to be used to perform authentication.

If you define it, you also need to define “auth_realm_avp” (Section 1.3.5, “auth_realm_avp (string)”) and “auth_username_avp” (Section 1.3.7, “auth_password_avp (string)”).

Example 1.6. Set auth_username_avp parameter

...
modparam("uac","auth_username_avp","$avp(11)")
...
				

1.3.7. auth_password_avp (string)

The definition of an AVP that might contain the password to be used to perform authentication.

If you define it, you also need to define “auth_password_avp” (Section 1.3.7, “auth_password_avp (string)”) and “auth_username_avp” (Section 1.3.7, “auth_password_avp (string)”).

Example 1.7. Set auth_password_avp parameter

...
modparam("uac","auth_password_avp","$avp(12)")
...
				

1.3.8. force_dialog (int)

Force create dialog if it is not created from the configuration script.

Default value is no.

Example 1.8. Set force_dialog parameter

...
modparam("uac", "force_dialog", yes)
...
				

1.4. Exported Functions

1.4.1.  uac_replace_from(display,uri) uac_replace_to(display,uri)

Replace in FROM/TO header the display name and the URI part.

display and URI parameters can include pseudo-variables.

IMPORTANT: calling the function more than once per branch will lead to inconsistent changes over the request.Be sure you do the change only ONCE per branch. Note that calling the function from REQUEST ROUTE affects all the branches!, so no other change will be possible in the future. For per branch changes use BRANCH and FAILURE route.

This function can be used from REQUEST_ROUTE, BRANCH_ROUTE and FAILURE_ROUTE.

Example 1.9. uac_replace_from/uac_replace_to usage

...
# replace both display and uri
uac_replace_from("$avp(display)","$avp(uri)");
# replace only display and do not touch uri
uac_replace_from("batman","");
# remove display and replace uri
uac_replace_from("","sip:robin@gotham.org");
# remove display and do not touch uri
uac_replace_from("","");
...
				

1.4.2.  uac_replace_from(uri) uac_replace_to(uri)

Replace in FROM/TO header the URI part without altering the display name.

URI parameter can include pseudo-variables.

This function can be used from REQUEST_ROUTE.

Example 1.10. uac_replace_from/uac_replace_to usage

...
uac_replace_from("sip:batman@gotham.org");
...
				

1.4.3.  uac_restore_from() uac_restore_to()

This function will check if the FROM/TO URI was modified and will use the information stored in header parameter to restore the original FROM/TO URI value.

NOTE - this function should be used only if you configured MANUAL restoring of the headers (see restore_mode param). For AUTO and NONE, there is no need to use this function.

This function can be used from REQUEST_ROUTE.

Example 1.11. uac_restore_from/uac_restore_to usage

...
uac_restore_from();
...
				

1.4.4.  uac_auth()

This function can be called only from failure route and will build the authentication response header and insert it into the request without sending anything. Credentials for buiding the authentication response will be taken from AVPs first (if AVPs are defined and populated) and then from the list of credentials provided by the uac_auth module.

This function can be used from FAILURE_ROUTE.

Example 1.12. uac_auth usage

...
uac_auth();
...