Documentation

Documentation.Interface-CoreMI-2-3 History

Show minor edits - Show changes to markup

September 27, 2018, at 07:21 PM by liviu -
Added lines 311-323:

shm_check

Only available with QM_MALLOC + DBG_MALLOC. Fully scans the shared memory pool in order to locate any inconsistencies. If any sign of memory corruption is detected, OpenSIPS will immediately abort.
Arguments: None
Output: current number of fragments.
Example of usage:

    # opensipsctl fifo shm_check
March 24, 2016, at 09:02 PM by 109.102.83.252 -
Changed line 70 from:
to:
March 24, 2016, at 09:02 PM by 109.102.83.252 -
Changed lines 31-37 from:

log_level [level] [pid]

Get or set the logging level of one or all OpenSIPS processes. If no argument is passed to the log_level command, it will print a table with the current logging levels of all processes. If a logging level is given, it will be set for each process. If pid is also given, the logging level will change only for that process. Arguments:

to:

debug (Removed in OpenSIPS 2.3)

Replaced by log_level function.

kill

The command will terminate OpenSIPS (and internal shutdown).
Arguments: none
Output: none

Changed lines 43-50 from:
    # opensipsctl fifo log_level
    Process::  PID=10670 Debug=2 Type=attendant
    Process::  PID=10672 Debug=3 Type=MI FIFO
    Process::  PID=10673 Debug=1 Type=SIP receiver udp:192.368.2.333:5060
    # opensipsctl fifo log_level 1
    New global debug:: 1
    # opensipsctl fifo log_level 4 10670
    New debug:: 4
to:
    # opensipsctl fifo kill
Changed lines 46-48 from:

kill

The command will terminate OpenSIPS (and internal shutdown).\\

to:

list_blacklists

The command lists all the defined (static or learned) blacklists from OpenSIPS.\\

Changed lines 49-50 from:

Output: none

to:

Output: an MI tree - first level (nodes named "List") will describe the list (name, owner, flags); Second level (nodes named "Rules) will describe the rules (blacklists) for each list (IP/mask, protocol, port, matching regexp, flags)

Changed line 53 from:
    # opensipsctl fifo kill
to:
    # opensipsctl fifo list_blacklists
Changed lines 56-57 from:

list_blacklists

The command lists all the defined (static or learned) blacklists from OpenSIPS.\\

to:

list_tcp_conns

The command lists all ongoing TCP/TLS connection from OpenSIPS.\\

Changed lines 59-60 from:

Output: an MI tree - first level (nodes named "List") will describe the list (name, owner, flags); Second level (nodes named "Rules) will describe the rules (blacklists) for each list (IP/mask, protocol, port, matching regexp, flags)

to:

Output: an MI tree - one record per connection with the following attributes : ID, state, proto, source, destination, timeout, lifetime

Changed line 63 from:
    # opensipsctl fifo list_blacklists
to:
    # opensipsctl fifo list_tcp_conns
Changed lines 66-70 from:

list_tcp_conns

The command lists all ongoing TCP/TLS connection from OpenSIPS.
Arguments: none
Output: an MI tree - one record per connection with the following attributes : ID, state, proto, source, destination, timeout, lifetime

to:

log_level [level] [pid]

Get or set the logging level of one or all OpenSIPS processes. If no argument is passed to the log_level command, it will print a table with the current logging levels of all processes. If a logging level is given, it will be set for each process. If pid is also given, the logging level will change only for that process. Arguments:

Changed lines 75-82 from:
    # opensipsctl fifo list_tcp_conns
to:
    # opensipsctl fifo log_level
    Process::  PID=10670 Debug=2 Type=attendant
    Process::  PID=10672 Debug=3 Type=MI FIFO
    Process::  PID=10673 Debug=1 Type=SIP receiver udp:192.368.2.333:5060
    # opensipsctl fifo log_level 1
    New global debug:: 1
    # opensipsctl fifo log_level 4 10670
    New debug:: 4
Added line 84:
March 24, 2016, at 08:59 PM by 109.102.83.252 -
Changed lines 31-33 from:

debug [level] [pid]

Get or set the logging level of one or all OpenSIPS processes. If no argument is passed to the debug command, it will print a table with the current logging levels of all processes. If a logging level is given, it will be set for each process. If pid is also given, the logging level will change only for that process.

to:

log_level [level] [pid]

Get or set the logging level of one or all OpenSIPS processes. If no argument is passed to the log_level command, it will print a table with the current logging levels of all processes. If a logging level is given, it will be set for each process. If pid is also given, the logging level will change only for that process.

Changed line 35 from:
  • debug level (-3...4)
to:
Changed line 40 from:
    # opensipsctl fifo debug
to:
    # opensipsctl fifo log_level
Changed line 44 from:
    # opensipsctl fifo debug 1
to:
    # opensipsctl fifo log_level 1
Changed line 46 from:
    # opensipsctl fifo debug 4 10670
to:
    # opensipsctl fifo log_level 4 10670
January 05, 2016, at 12:20 PM by liviu -
Changed line 33 from:

Get or set the logging level of one or all OpenSIPS processes. If no argument is passed to the debug command, it will print a table with the current logging levels of all processes. If a logging level is given, it will be set for each process. If pid is also given, the logging level will be changed only for that process.

to:

Get or set the logging level of one or all OpenSIPS processes. If no argument is passed to the debug command, it will print a table with the current logging levels of all processes. If a logging level is given, it will be set for each process. If pid is also given, the logging level will change only for that process.

January 05, 2016, at 12:19 PM by liviu -
Changed line 33 from:

Get or set the logging level of one or all OpenSIPS processes. If no argument is passed to the debug command, it will print a table with the current logging levels of all processes. If a logging level is given, it will be set for each process. If pid is given, the logging level will be changed only for that process.

to:

Get or set the logging level of one or all OpenSIPS processes. If no argument is passed to the debug command, it will print a table with the current logging levels of all processes. If a logging level is given, it will be set for each process. If pid is also given, the logging level will be changed only for that process.

March 13, 2015, at 08:50 PM by liviu -
Added line 144:
    list_statistics
Deleted line 161:
    nh_enable_rtpp
Added lines 181-200:
    ....

@]

list_statistics

Prints a list of all available statistics in the current configuration of OpenSIPS

Examples of usage: [@

    # opensipsctl fifo list_statistics

shmem:total_size:: incremental shmem:used_size:: incremental shmem:real_used_size:: incremental shmem:max_used_size:: incremental shmem:free_size:: incremental shmem:fragments:: incremental core:rcv_requests:: incremental core:rcv_replies:: incremental core:fwd_requests:: incremental core:fwd_replies:: incremental core:drop_requests:: incremental

August 12, 2014, at 01:23 PM by liviu -
Changed lines 32-37 from:

debug [level]

Gets or sets the value of the debug core variable. You may use it to dynamically (at runtime) change or inspect the debug level of your OpenSIPS. If no argument is passed, the function will fetch the value of the debug level.
Arguments: debug level (-3...4)
Output: debug level (only when no argument is passed). The value will be returned as a single MI node with name "DEBUG"

to:

debug [level] [pid]

Get or set the logging level of one or all OpenSIPS processes. If no argument is passed to the debug command, it will print a table with the current logging levels of all processes. If a logging level is given, it will be set for each process. If pid is given, the logging level will be changed only for that process. Arguments:

  • debug level (-3...4)
  • Unix pid (validated by OpenSIPS)
Changed lines 41-43 from:
    DEBUG:: 4
to:
    Process::  PID=10670 Debug=2 Type=attendant
    Process::  PID=10672 Debug=3 Type=MI FIFO
    Process::  PID=10673 Debug=1 Type=SIP receiver udp:192.368.2.333:5060
Added lines 45-47:
    New global debug:: 1
    # opensipsctl fifo debug 4 10670
    New debug:: 4
March 20, 2014, at 08:55 PM by razvancrainea -
Added lines 1-284:
Documentation -> Manuals -> Manual 2.3 -> Core MI Functions

(:title Core MI Functions - 2.3:)


(:allVersions Interface-CoreMI 2.3:)


Core MI Functions v2.3
PrevNext

(:toc-float Table of Content:)

MI (management interface) functions which are exported by OpenSIPS core.

arg

Returns the full list of arguments used when OpenSIPS was started. As in UNIX, the first argument is the name of executable binary.
Arguments: none
Output: multiple MI nodes where each node contains an argument. The MI nodes have no name, but only value.

Example of usage:

    # opensipsctl fifo arg
    ./opensips
    -f
    /etc/openser/test.cfg

debug [level]

Gets or sets the value of the debug core variable. You may use it to dynamically (at runtime) change or inspect the debug level of your OpenSIPS. If no argument is passed, the function will fetch the value of the debug level.
Arguments: debug level (-3...4)
Output: debug level (only when no argument is passed). The value will be returned as a single MI node with name "DEBUG"

Examples of usage:

    # opensipsctl fifo debug
    DEBUG:: 4
    # opensipsctl fifo debug 1

kill

The command will terminate OpenSIPS (and internal shutdown).
Arguments: none
Output: none

Examples of usage:

    # opensipsctl fifo kill

list_blacklists

The command lists all the defined (static or learned) blacklists from OpenSIPS.
Arguments: none
Output: an MI tree - first level (nodes named "List") will describe the list (name, owner, flags); Second level (nodes named "Rules) will describe the rules (blacklists) for each list (IP/mask, protocol, port, matching regexp, flags)

Examples of usage:

    # opensipsctl fifo list_blacklists

list_tcp_conns

The command lists all ongoing TCP/TLS connection from OpenSIPS.
Arguments: none
Output: an MI tree - one record per connection with the following attributes : ID, state, proto, source, destination, timeout, lifetime

Examples of usage:

    # opensipsctl fifo list_tcp_conns

ps

The command will list all all OpenSIPS processes, along with type and description.
Arguments: none
Output: multiple MI nodes (named "Process") - each node contains process ID (internal), PID (OS), Type and description

Examples of usage:

    # opensipsctl fifo ps
    Process::  ID=0 PID=16224 Type=attendant
    Process::  ID=1 PID=16225 Type=SIP receiver udp:192.368.1.2:5060 
    Process::  ID=2 PID=16226 Type=timer
    Process::  ID=3 PID=16227 Type=MI FIFO
    Process::  ID=4 PID=16228 Type=TCP receiver
    Process::  ID=5 PID=16230 Type=TCP main

pwd

Prints the working directory of OpenSIPS instance.
Arguments: none
Output: a single MI node with name "WD" containing the working directory full path.

Examples of usage:

    # opensipsctl fifo pwd
    WD:: /

uptime

Prints various time information about OpenSIPS - when it started to run, for how long it runs.
Arguments: none
Output: three MI nodes: "Now" - current time; "Up since" - start time ; "Up time" - number of seconds since started.

Examples of usage:

    # opensipsctl fifo uptime
    Now:: Mon Jul 21 17:41:03 2008
    Up since:: Mon Jul 21 17:36:33 2008
    Up time:: 270 [sec]

version

Prints the version string of a runningOpenSIPS.
Arguments: none
Output: one MI node (named "Server") containing the version string.

Examples of usage:

    # opensipsctl fifo version
    Server:: OpenSIPS (1.4.0dev14-notls (i386/linux))

which

Prints all available MI commands from the queried OpenSIPSinstance.
Arguments: none
Output: multiple MI nodes (no name), each node containing (as value) the name of an available MI command. NOTE that the list of available MI commands may differ depending of what modules your OpenSIPS is using.

Examples of usage:

    # opensipsctl fifo which
    get_statistics
    reset_statistics
    uptime
    version
    pwd
    arg
    which
    ps
    kill
    debug
    list_blacklists
    ul_rm
    ul_rm_contact
    ul_dump
    ul_flush
    ul_add
    ul_show_contact
    nh_enable_ping
    nh_enable_rtpp

get_statistics

Prints the statistics (all, group or one) realtime values.
Arguments: input may be "all" - print all available statistics; "group:" - print only statistics from a certain group; "name" - print only this statistic. The OpenSIPS core defines the following groups: core, shmem; Modules export groups typically named like the module itself.
Output: list of MI nodes (no name) - each MI mode contains the name and value of a single statistic variable.

Examples of usage:

    # opensipsctl fifo get_statistics rcv_requests
    core:rcv_requests = 35243
    # opensipsctl fifo get_statistics shmem:      
    shmem:total_size = 33554432
    shmem:used_size = 1686952
    shmem:real_used_size = 1704592
    shmem:max_used_size = 1704592
    shmem:free_size = 31849840
    shmem:fragments = 1
    # opensipsctl fifo get_statistics all
    ....

reset_statistics

Reset (to zero) the value of a statistic variable. Note that not all variables allow reset (depending of the nature of the information they carry - example "shmem:used_size").
Arguments: name of the variable to be reset.
Output: none.

Examples of usage:

    # opensipsctl fifo get_statistics received_replies
    core:received_replies = 14543
    # opensipsctl fifo reset_statistics received_replies
    # opensipsctl fifo get_statistics received_replies
    core:received_replies = 0

cache_store

This command stores in a cache system a string value.
Arguments:
- cache system to use - for the cache system implemented by OpenSIPS module 'localcache' the value of this parameter should be 'local'
- the label to be associated with this value
- the string to be stored
Output: none.
Examples of usage:

    # opensipsctl fifo cache_store local password_user1 password

cache_fetch

This command queries for a stored value.
Arguments:
- cache system to use - for the cache system implemented by OpenSIPS module 'localcache' the value of this parameter should be 'local'
- the label associated with the value
Output: MI tree containing the value if a record is found or 'Value not found' string otherwise.
Examples of usage:

    # opensipsctl fifo cache_fetch local password_user1

cache_remove

This command removes a record from the cache system.
Arguments:
- cache system to use
- the label associated with the stored value
Output: None.
Examples of usage:

    # opensipsctl fifo cache_remove local password_user1

event_subscribe

Subscribes an external application to a certain event.
Arguments:
- event name
- external application socket
- expire time, in seconds - if absent, the subscription is valid only one hour (3600 s)
Output: None.
Examples of usage:

    # opensipsctl fifo event_subscribe E_PIKE_BLOCKED udp:127.0.0.1:8888 1200

events_list

Lists all the events published through the Event Interface.
Arguments: None.
Output: None.
Examples of usage:

    # opensipsctl fifo events_list
    Event:: E_CORE_THRESHOLD id=0
    Event:: E_RTPPROXY_STATUS id=1
    Event:: E_PIKE_BLOCKED id=2

subscribers_list

Lists information about the subscribers
Arguments:
- event name
- external application socket
Output: If no parameter is specified, then the command returns information about all events and their subscribers. If the event is specified, only the external applications subscribed for that event are returned. If the socket is also specified, only one subscriber information is returned.
Examples of usage:

    # opensipsctl fifo subscribers_list
    Event:: E_CORE_THRESHOLD id=0
    Event:: E_RTPPROXY_STATUS id=1
	Subscriber::  socket=unix:/tmp/event.sock expire=never
	Subscriber::  socket=udp:127.0.0.1:8888 expire=1100
    Event:: E_PIKE_BLOCKED id=2
	Subscriber::  socket=rabbitmq:guest@127.0.0.1/hello expire=never

    # opensipsctl fifo subscribers_list E_RTPPROXY_STATUS
    Event:: E_RTPPROXY_STATUS id=1
	Subscriber::  socket=unix:/tmp/event.sock expire=never
	Subscriber::  socket=udp:127.0.0.1:8888 expire=1100

    # opensipsctl fifo subscribers_list E_RTPPROXY_STATUS unix:/tmp/event.sock
    Event:: E_RTPPROXY_STATUS id=1
	Subscriber::  socket=unix:/tmp/event.sock expire=never

(:commentboxchrono:)


Page last modified on September 27, 2018, at 07:21 PM