(:redirect Documentation/Tutorials-Presence-PuaXmppConfig quiet=1:)

Download

http://opensips.org/uploads/Resources/opensips_xmpp.cfg?

uploads/Resources/opensips_xmpp.cfg?

Download file?

Download text?

# OpenSIPS SIP-XMPP Gateway

debug=3
log_stderror=no
log_facility=LOG_LOCAL0

fork=yes
children=4

listen=udp:10.10.10.10:5060
alias="sip.domain.com"

# ------------------ module loading ----------------------------------

mpath="/usr/local/lib/opensips/modules/"

loadmodule "db_mysql.so"
loadmodule "textops.so"
loadmodule "maxfwd.so"
loadmodule "rr.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "signaling.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "mi_fifo.so"
loadmodule "uri.so"

loadmodule "xmpp.so"
loadmodule "pua.so"
loadmodule "pua_xmpp.so"
loadmodule "presence.so"
loadmodule "presence_xml.so"

# ----------------- setting module-specific parameters ---------------
modparam("usrloc|presence|presence_xml|pua", "db_url",  "mysql://opensips:opensipsrw@localhost/opensips")
modparam("presence|pua_xmpp", "server_address", "sip:sa@10.10.10.10:5060")
modparam("presence_xml", "force_active", 1)
modparam("pua_xmpp", "presence_server", "sip:sa@10.10.10.10:5060")

modparam("xmpp", "xmpp_domain", "sip.domain.com")  # the name that OpenSIPS will register with as a component to the jabber server
modparam("xmpp", "xmpp_host", "xmpp.domain.com")   # the location of the jabber server
modparam("xmpp", "sip_domain", "sip.domain.com")   # the domain of the sip users visible to the xmpp users 
modparam("xmpp", "backend", "component")
modparam("xmpp", "outbound_proxy", "sip:10.10.10.10:5060")

modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
modparam("usrloc", "db_mode", 2)

route {
    if (!mf_process_maxfwd_header("10")) {
        sl_send_reply("483","Too Many Hops");
        exit;
    }

    if (has_totag()) {
        # sequential request withing a dialog should
        # take the path determined by record-routing
        if (loose_route()) {
            if (is_method("BYE")) {
                setflag(1); # do accounting ...
                setflag(3); # ... even if the transaction fails
            } else if (is_method("INVITE")) {
                # even if in most of the cases is useless, do RR for
                # re-INVITEs alos, as some buggy clients do change route set
                # during the dialog.
                record_route();
            }
            # route it out to whatever destination was set by loose_route()
            # in $du (destination URI).
            route(1);
        } else {
            /* uncomment the following lines if you want to enable presence */
            if (is_method("SUBSCRIBE|NOTIFY")) {
            ##  # in-dialog subscribe requests
                route(2);
                exit;
            }
            if ( is_method("ACK") ) {
                if ( t_check_trans() ) {
                    # non loose-route, but stateful ACK; must be an ACK after 
                    # a 487 or e.g. 404 from upstream server
                    t_relay();
                    exit;
                } else {
                    # ACK without matching transaction ->
                    # ignore and discard
                    exit;
                }
            }
            sl_send_reply("404","Not here");
        }
        exit;
    }
    #initial requests

    # CANCEL processing
    if (is_method("CANCEL"))
    {
        if (t_check_trans())
            t_relay();
        exit;
    }

    t_check_trans();

    # authenticate if from local subscriber (uncomment to enable auth)
    # authenticate all initial non-REGISTER request that pretend to be
    # generated by local subscriber (domain from FROM URI is local)
    ##if (!(method=="REGISTER") && from_uri==myself) /*no multidomain version*/
    ##if (!(method=="REGISTER") && is_from_local())  /*multidomain version*/
    ##{
    ##  if (!proxy_authorize("", "subscriber")) {
    ##      proxy_challenge("", "0");
    ##      exit;
    ##  }
    ##  if (!db_check_from()) {
    ##      sl_send_reply("403","Forbidden auth ID");
    ##      exit;
    ##  }
    ##
    ##  consume_credentials();
    ##  # caller authenticated
    ##}

    # preloaded route checking
    if (loose_route()) {
        xlog("L_ERR",
        "Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");
        if (!is_method("ACK"))
            sl_send_reply("403","Preload Route denied");
        exit;
    }
  
    # handle initial presence messages
    if(uri==myself || uri=~"sip:.+gmail.com" || uri=~"sip:.+@xmpp.domain.com") # detect if it's for an XMPP user
    {
        if( is_method("PUBLISH|SUBSCRIBE"))
            route(2);
    };

    # handle xmpp messages
    if(is_method("MESSAGE") && (uri=~"sip:.+gmail.com" || uri=~"sip:.+@xmpp.domain.com"))
    {
        if(!t_newtran())
        {
            sl_reply_error();
            exit;
        }
        if (xmpp_send_message()) {
            t_reply("200", "Accepted");
        } else {
            t_reply("404", "Not found");
        }
        exit;
    };

    # record routing
    if (!is_method("REGISTER|MESSAGE"))
        record_route();

    # account only INVITEs
    if (is_method("INVITE")) {
        setflag(1); # do accounting
    }
    if (!uri==myself)
    ## replace with following line if multi-domain support is used
    ##if (!is_uri_host_local())
    {
        append_hf("P-hint: outbound\r\n"); 
        # if you have some interdomain connections via TLS
        ##if($rd=="tls_domain1.net") {
        ##  t_relay("tls:domain1.net");
        ##  exit;
        ##} else if($rd=="tls_domain2.net") {
        ##  t_relay("tls:domain2.net");
        ##  exit;
        ##}
        route(1);
    }

    # requests for my domain

    if (is_method("REGISTER"))
    {
        # authenticate the REGISTER requests (uncomment to enable auth)
        ##if (!www_authorize("", "subscriber"))
        ##{
        ##  www_challenge("", "0");
        ##  exit;
        ##}
        ##
        ##if (!db_check_to()) 
        ##{
        ##  sl_send_reply("403","Forbidden auth ID");
        ##  exit;
        ##}

        if (!save("location"))
            sl_reply_error();

        exit;
    }

    if ($rU==NULL) {
        # request with no Username in RURI
        sl_send_reply("484","Address Incomplete");
        exit;
    }

    # apply DB based aliases (uncomment to enable)
    ##alias_db_lookup("dbaliases");

    # do lookup with method filtering
    if (!lookup("location","m")) {
        switch ($retcode) {
            case -1:
            case -3:
                t_newtran();
                t_reply("404", "Not Found");
                exit;
            case -2:
                sl_send_reply("405", "Method Not Allowed");
                exit;
        }
    }

    # when routing via usrloc, log the missed calls also
    setflag(2);

    route(1);
}


route[1] {
    # send it out now; use stateful forwarding as it works reliably
    # even for UDP2TCP

    if (!t_relay()) {
        sl_reply_error();
    };
    exit;
}

route[2] {
    # create new transaction to catch retransmissions
    if(!t_newtran())
    {
        sl_reply_error();
        exit;
    }

    # if it is Notify - for xmpp gateway
    if( is_method("NOTIFY"))
    {
        t_reply("200", "OK");
        pua_xmpp_notify();
        exit;
    }

    # handle presence specific messages
    if(is_method("PUBLISH"))
    {
        handle_publish();
    }
    else
    if(is_method("SUBSCRIBE"))
    {
        handle_subscribe();
        if($hdr(Event)== "presence" && (uri=~"sip:.+gmail.com" || uri=~"sip:.+@xmpp.domain.com") )
            pua_xmpp_req_winfo("$ruri", "$hdr(Expires)");
    }
    exit;
}

    

1. for 1.5 you must load also signaling module; uncomment the next line
2. loadmodule "signaling.so"

<-Back

<-Back

                /* the call to t_release is no longer needed in 1.5 */ 

                /* the call to t_release is no longer needed in 1.5 */

modparam("presence", "server_address", "sip:sa@10.10.10.10:5060")

modparam("pua_xmpp", "server_address", "sip:sa@10.10.10.10:5060")

modparam("presence|presence_xml", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

[+[@

}@]+]

<-Back

fork=yes

[++[@

1. ----------- global configuration parameters ------------------------

2. OpenSIPS configuration file
4. XMPP - SIP gateway : messaging and presence

# ----------- global configuration parameters ------------------------

/* Uncomment these lines to enter debugging mode */ 
debug=7            # debug level (cmd line: -dddddddddd)
fork=no
log_stderror=yes

sip_warning=0

check_via=no	# (cmd. line: -v)
dns=no          # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
listen=udp:10.10.10.10:5060
children=4
#fifo="/tmp/opensips_fifo"

#
# uncomment the following lines for TLS support
#disable_tls = 0
#listen = tls:your_IP:5061
#tls_verify_server = 1
#tls_verify_client = 1
#tls_require_client_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/usr/local/etc/opensips/tls/user/user-cert.pem"
#tls_private_key = "/usr/local/etc/opensips/tls/user/user-privkey.pem"
#tls_ca_list = "/usr/local/etc/opensips/tls/user/user-calist.pem"

# ------------------ module loading ----------------------------------
mpath="/usr/local/opensips/lib/modules/"

loadmodule "db_mysql.so"
loadmodule "sl.so"
loadmodule "maxfwd.so"
loadmodule "textops.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "presence.so"
loadmodule "presence_xml.so"
loadmodule "mi_fifo.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "pua.so"
loadmodule "xmpp.so"
loadmodule "pua_xmpp.so"


# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "auth.so"
#loadmodule "auth_db.so"

# ----------------- setting module-specific parameters ---------------

# --mi_fifo params --
modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")

# -- usrloc params --
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")

# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config), 
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# -- presence and presence_xml params --
modparam("presence", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam("presence", "server_address", "sip:10.10.10.10:5060")
modparam("presence_xml", "force_active", 1)

# -- pua and pua_xmpp params --
modparam("pua", "db_url", "mysql://opensips:opensipsrw@localhost/opensips")
modparam("pua_xmpp", "server_address", "sip:10.10.10.10:5060")

# -- xmpp parameters --
modparam("xmpp", "domain_separator", "*")
modparam("xmpp", "gateway_domain", "sip-xmpp.siphub.ro")
modparam("xmpp", "xmpp_domain", "xmpp-sip.siphub.ro")
modparam("xmpp", "xmpp_host", "xmpp.siphub.ro")
modparam("xmpp", "backend", "component")


# -------------------------  request routing logic -------------------

# main routing logic


route{

	# initial sanity checks -- messages with
	# max_forwards==0, or excessively long requests
	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");
		exit;
	};

	if (msg:len >=  2048 ) {
		sl_send_reply("513", "Message too big");
		exit;
	};

	# we record-route all messages -- to make sure that
	# subsequent messages will go through our proxy; that's
	# particularly good if upstream and downstream entities
	# use different transport protocol
	if (!method=="REGISTER")
		record_route();

	# subsequent messages withing a dialog should take the
	# path determined by record-routing
	if (loose_route()) {
		# mark routing logic in request
		append_hf("P-hint: rr-enforced\r\n"); 
		route(1);
	};
	if(method == "INVITE")
		setflag(5);

	if( uri=~"sip:.+@sip-xmpp.siphub.ro" ||
		 uri=~"sip:.+@sip-xmpp.siphub.ro")
	{
		if( is_method("PUBLISH|SUBSCRIBE|NOTIFY"))
			route(2);
	}

	if( uri=~"sip:.+@sip-xmpp.siphub.ro")
	{
		# absorb retransmissions ###
		if (!t_newtran()) {
			sl_reply_error();
			return;
		}
        if (method == "MESSAGE") {
			log("*** xmpp-handled MESSAGE message.\n");
			if (xmpp_send_message()) {
				t_reply("200", "Accepted");
			} else {
				t_reply("404", "Not found");
			}
			return;
		}else {
			t_reply("403","not supported");
			exit;
		}

	}

	if (!uri==myself) {
		# mark routing logic in request
		append_hf("P-hint: outbound\r\n"); 
		# if you have some interdomain connections via TLS
		#if(uri=~"@tls_domain1.net") {
		#	t_relay("tls:domain1.net");
		#	exit;
		#} else if(uri=~"@tls_domain2.net") {
		#	t_relay("tls:domain2.net");
		#	exit;
		#}
		route(1);
	};

	# if the request is for other domain use UsrLoc
	# (in case, it does not work, use the following command
	# with proper names and addresses in it)
	if (uri==myself) {

		if( is_method("PUBLISH|SUBSCRIBE|NOTIFY"))
			route(2);

		if (method=="REGISTER") {

			# Uncomment this if you want to use digest authentication
			#if (!www_authorize("opensips.org", "subscriber")) {
			#	www_challenge("opensips.org", "0");
			#	exit;
			#};

			save("location");
			exit;
		};

		# native SIP destinations are handled using our USRLOC DB
		if (!lookup("location")) {
			sl_send_reply("404", "Not Found");
			exit;
		};
		append_hf("P-hint: usrloc applied\r\n"); 
	};

	route(1);
}


route[1] {
	# send it out now; use stateful forwarding as it works reliably
	# even for UDP2TCP
	if (!t_relay()) {
		sl_reply_error();
	};
	exit;
}

route[2]
{
	if ( !t_newtran() ){
        sl_reply_error();
        exit;
     };

	if( is_method("NOTIFY") && uri=~"sip:.+@sip-xmpp.siphub.ro"){
		pua_xmpp_notify();
		t_reply("200", "OK");
		exit;
	}

	if(is_method("PUBLISH")){
		handle_publish();
		t_release();
	} 
	else 
	if( is_method("SUBSCRIBE")){
		handle_subscribe();
		if( uri=~"sip:.+@sip-xmpp.siphub.ro" && $hdr(Event)== "presence"){
			pua_xmpp_req_winfo("$ruri", "$hdr(Expires)");
		}
		t_release();
	}

	exit;
}