Documentation

Documentation.Script-CoreParameters-1-5 History

Show minor edits - Show changes to markup

August 05, 2013, at 04:01 PM by 109.99.235.212 -
Changed line 4 from:

Page for other versions: devel 1.9 1.8 old versions: 1.7 1.6 1.5 1.4

to:

(:allVersions Script-CoreParameters 1.5:)

May 28, 2013, at 09:25 PM by 109.99.235.212 -
Changed line 4 from:

Page for other versions devel 1.9 1.8 old versions : 1.7 1.6 1.5 1.4

to:

Page for other versions: devel 1.9 1.8 old versions: 1.7 1.6 1.5 1.4

May 28, 2013, at 09:21 PM by 109.99.235.212 -
Added line 2:

(:title Core Parameters - ver 1.5 :)

Added lines 4-12:

Page for other versions devel 1.9 1.8 old versions : 1.7 1.6 1.5 1.4


Core Parameters v1.5
PrevNext

May 16, 2013, at 08:13 PM by 109.99.235.212 -
Added lines 1-886:
Documentation -> Manuals -> Manual 1.5 -> Core parameters

(:toc-float Table of Content:)

This section lists the all the parameters exported by OpenSIPS core for script usage (to be used in opensips.cfg)

  1. Core keywords
  2. Core values
  3. Core parameters

Core Keywords

Keywords specific to SIP messages which can be used mainly in 'if' expressions.

af

The address family of the received SIP message. It is INET if the message was received over IPv4 or INET6 if the message was received over IPv6.

Exampe of usage:

    if(af==INET6) {
        log("Message received over IPv6 link\n");
    };

dst_ip

The IP of the local interface where the SIP message was received. When the proxy listens on many network interfaces, makes possible to detect which was the one that received the packet.

Example of usage:

   if(dst_ip==127.0.0.1) {
      log("message received on loopback interface\n");
   };

dst_port

The local port where the SIP packet was received. When OpenSIPS is listening on many ports, it is useful to learn which was the one that received the SIP packet.

Example of usage:

   if(dst_port==5061)
   {
       log("message was received on port 5061\n");
   };

from_uri

This script variable is a reference to the URI of 'From' header. It can be used to test 'From'- header URI value.

Example of usage:

    if(is_method("INVITE") && from_uri=~".*@opensips.org")
    {
        log("the caller is from opensips.org\n");
    };

method

The variable is a reference to the SIP method of the message.

Example of usage:

    if(method=="REGISTER")
    {
       log("this SIP request is a REGISTER message\n");
    };

msg:len

The variable is a reference to the size of the message. It can be used in 'if' constructs to test message's size.

Example of usage:

    if(msg:len>2048)
    {
        sl_send_reply("413", "message too large");
        exit;
    };

$retcode

It represents the value returned by last function executed (similar to $? from bash -- if you wish, you can use also $? in OpenSIPS config, both names '$retcode' and '$?' are supported). If tested after a call of a route, it is the value retuned by that route.

Example of usage:

   route {
       route(1);
       if($retcode==1)
       {
           log("The request is an INVITE\n");
       };
   }


   route[1] {
       if(is_method("INVITE"))
           return(1);
       return(2);
   }

proto

This variable can be used to test the transport protocol of the SIP message.

Example of usage:

    if(proto==UDP)
    {
        log("SIP message received over UDP\n");
    };

status

If used in onreply_route, this variable is a reference to the status code of the reply. If it used in a standard route block, the variable is a reference to the status of the last reply sent out for the current request.

Example of usage:

    if(status=="200")
    {
        log("this is a 200 OK reply\n");
    };

src_ip

Reference to source IP address of the SIP message.

Example of usage:

    if(src_ip==127.0.0.1)
    {
        log("the message was sent from localhost!\n");
    };

src_port

Reference to source port of the SIP message (from which port the message was sent by previous hop).

Example of usage:

    if(src_port==5061)
    {
        log("message sent from port 5061\n");
    }

to_uri

This variable can be used to test the value of URI from To header.

Example of usage:

  if(to_uri=~"sip:.+@opensips.org")
  {
      log("this is a request for opensips.org users\n");
  };

uri

This variable can be used to test the value of the request URI.

Example of usage:

    if(uri=~"sip:.+@opensips.org")
    {
        log("this is a request for opensips.org users\n");
    };

(:toc-back:)


Core Values

Values that can be used in 'if' expressions to check against Core Keywords

INET

This keyword can be used to test whether the SIP packet was received over an IPv4 connection.

Example of usage:

    if(af==INET)
    {
        log("the SIP message was received over IPv4\n");
    };

INET6

This keyword can be used to test whether the SIP packet was received over an IPv6 connection.

Example of usage:

  if(af==INET6)
  {
      log("the SIP message was received over IPv6\n");
  };

TCP

This keyword can be used to test the value of 'proto' and check whether the SIP packet was received over TCP or not.

Example of usage:

  if(proto==TCP)
  {
      log("the SIP message was received over TCP\n");
  };

UDP

This keyword can be used to test the value of 'proto' and check whether the SIP packet was received over UDP or not.

Example of usage:

  if(proto==UDP)
  {
      log("the SIP message was received over UDP\n");
  };

max_len

This keyword is set to the maximum size of an UDP packet. It can be used to test message's size.

Example of usage:

    if(msg:len>max_len)
    {
        sl_send_reply("413", "message too large to be forwarded over UDP without fragmentation");
        exit;
    }

myself

It is a reference to the list of local IP addresses, hostnames and aliases that has been set in OpenSIPS configuration file. This lists contain the domains served by OpenSIPS.

The variable can be used to test if the host part of an URI is in the list. The usefulness of this test is to select the messages that has to be processed locally or has to be forwarded to another server.

See "alias" to add hostnames,IP addresses and aliases to the list.

Example of usage:

    if(uri==myself) {
        log("the request is for local processing\n");
    };

null

Can be used in assignment to reset the value of a per-script variable or to delete an avp.

Example of usage:

    $avp(i:12) = null;
    $var(x) = null;

(:toc-back:)


Core parameters

Global parameters that can be set in configuration file. Accepted values are, depending on the actual parameters strings, numbers and yes/ no. If you need to specify either "yes" or "no" as part of a string, wrap this in double quotes.

advertised_address

It can be an IP address or string and represents the address advertised in Via header and other destination lumps (e.g RR header). If empty or not set (default value) the socket address from where the request will be sent is used.

  WARNING: 
  - don't set it unless you know what you are doing (e.g. nat traversal)
  - you can set anything here, no check is made (e.g. foo.bar will be
  accepted even if foo.bar doesn't exist)

Example of usage:

    advertised_address="opensips.org"

advertised_port

The port advertised in Via header and other destination lumps (e.g. RR). If empty or not set (default value) the port from where the message will be sent is used. Same warnings as for 'advertised_address'.

Example of usage:

    advertised_port=5080

alias

Parameter to set alias hostnames for the server. It can be set many times, each value being added in a list to match the hostname when 'myself' is checked.

It is necessary to include the port (the port value used in the "port=" or "listen=" definitions) in the alias definition otherwise the loose_route() function will not work as expected for local forwards

Example of usage:

    alias=other.domain.com:5060
    alias=another.domain.com:5060

avp_aliases

Contains a multiple definition of aliases for AVP names.

Example of usage:

    avp_aliases="uuid=I:660;email=s:email_addr;fwd=i:753"

auto_aliases

This parameter controls if aliases should be automatically discovered and added during fixing listening sockets. The auto discovered aliases are result of the DNS lookup (if listen is a name and not IP) or of a reverse DNS lookup on the listen IP.

Far backward compatibility reasons, the default value is "on".

Example of usage:

    auto_aliases=no
    auto_aliases=0

check_via

Check if the address in top most via of replies is local. Default value is 0 (check disabled).

Example of usage:

    check_via=1 

children

Number of children to fork for the UDP interfaces (one set for each interface - ip:port). Default value is 8.

Example of usage:

    children=16

chroot

The value must be a valid path in the system. If set, OpenSIPS will chroot (change root directory) to its value.

Example of usage:

    chroot=/other/fakeroot

debug

Set the debug level. Higher values make OpenSIPS to print more debug messages.

Examples of usage:

    debug=3 -- print only important messages (like errors or more critical situations) 
    - recommended for running proxy as daemon

    debug=9 -- print a lot of debug messages - use it only when doing debugging sessions

The 'debug' parameter is usually used in concordance with 'log_stderror' parameter.

Value of 'debug' parameter can also be get and set dynamically using 'debug' Core MI function.

For more see: http://www.voice-system.ro/docs/ser-syslog/

disable_core_dump

Can be 'yes' or 'no'. By default core dump limits are set to unlimited or a high enough value. Set this config variable to 'yes' to disable core dump-ing (will set core limits to 0).

Default value is 'no'.

Example of usage:

    disable_core_dump=yes

disable_dns_blacklist

The DNS resolver, when configured with failover, can automatically store in a temporary blacklist the failed destinations. This will prevent (for a limited period of time) OpenSIPS to send requests to destination known as failed. So, the blacklist can be used as a memory for the DNS resolver.

The temporary blacklist created by DNS resolver is named "dns" and it is by default selected for usage (no need use the use_blacklist()) function. The rules from this list have a life time of 4 minutes - you can change it at compile time, from blacklists.h .

Can be 'yes' or 'no'. By default the blacklist is disabled (Default value is 'yes').

Example of usage:

    disable_dns_blacklist=no

disable_dns_failover

Can be 'yes' or 'no'. By default DNS-based failover is enabled. Set this config variable to 'yes' to disable the DNS-based failover. This is a global option, affecting the core and the modules also.

Default value is 'no'.

Example of usage:

    disable_dns_failover=yes

disable_tcp

Global parameter to disable TCP support in the SIP server. Default value is 'no'.

Example of usage:

    disable_tcp=yes

disable_tls

Global parameter to disable TLS support in the SIP server. Default value is 'yes'.

Example of usage:

    disable_tcp=no

dns

This parameter controls if the SIP server should attempt to lookup its own domain name in DNS. If this parameter is set to yes and the domain name is not in DNS a warning is printed on syslog and a "received=" field is added to the via header.

Default is no.

dns_retr_time

Time in seconds before retrying a dns request. Default value is system specific, depends also on the '/etc/resolv.conf' content (usually 5s).

Example of usage:

    dns_retr_time=3

dns_retr_no

Number of dns retransmissions before giving up. Default value is system specific, depends also on the '/etc/resolv.conf' content (usually 4).

Example of usage:

    dns_retr_no=3

dns_servers_no

How many dns servers from the ones defined in '/etc/resolv.conf' will be used. Default value is to use all of them.

Example of usage:

    dns_servers_no=2

dns_try_ipv6

Can be 'yes' or 'no'. If it is set to 'yes' and a DNS lookup fails, it will retry it for ipv6 (AAAA record). Default value is 'no'.

Example of usage:

    dns_try_ipv6=yes

dns_use_search_list

Can be 'yes' or 'no'. If set to 'no', the search list in '/etc/resolv.conf' will be ignored (=> fewer lookups => gives up faster). Default value is 'yes'.

HINT: even if you don't have a search list defined, setting this option to 'no' will still be "faster", because an empty search list is in fact search "" (so even if the search list is empty/missing there will still be 2 dns queries, eg. foo+'.' and foo+""+'.')

Example of usage:

    dns_use_search_list=no

dst_blacklist

Definition of a static (read-only) IP/destination blacklist. These lists can be selected from script (at runtime) to filter the outgoing requests, based on IP, protocol, port, etc.

Its primary purposes will be to prevent sending requests to critical IPs (like GWs) due DNS or to avoid sending to destinations that are known to be unavailable (temporary or permanent).

Example of usage:

   # filter out requests going to ips of my gws
   dst_blacklist = gw:{( tcp , 192.168.2.100 , 5060 , "" ),( any , 192.168.2.101 , 0 , "" )}
   # block requests going to "evil" networks
   dst_blacklist = net_filter:{ ( any , 192.168.1.100/255.255.255.0 , 0 , "" )}
   # block message requests with nasty words
   dst_blacklist = msg_filter:{ ( any , 192.168.20.0/255.255.255.0 , 0 , "MESSAGE*ugly_word" )}
   # block requests not going to a specific subnet
   dst_blacklist = net_filter2:{ !( any , 192.168.30.0/255.255.255.0 , 0 , "" )}

Each rule is defined by:

  • protocol : TCP, UDP, TLS or "any" for anything
  • port : number or 0 for any
  • ip/mask
  • test patter - is a filename like matching (see "man 3 fnmatch") applied on the outgoing request buffer (first_line+hdrs+body)

fork

If set to 'yes' the proxy will fork and run in daemon mode - one process will be created for each network interface the proxy listens to and for each protocol (TCP/UDP), multiplied with the value of 'children' parameter.

When set to 'no', the proxy will stay bound to the terminal and runs as single process. First interface is used for listening to.

Default value is 'yes'.

Example of usage:

    fork=no

group gid

The group id to run OpenSIPS.

Example of usage:

  group="opensips"

listen

Set the network addresses the SIP server should listen to. It can be an IP address, hostname or network interface id or combination of protocol:address:port (e.g., udp:10.10.10.10:5060). This parameter can be set multiple times in same configuration file, the server listening on all addresses specified.

Example of usage:

    listen=10.10.10.10
    listen=eth1:5062
    listen=udp:10.10.10.10:5064

If you omit this directive then the SIP server will listen on all interfaces. On start the SIP server reports all the interfaces that it is listening on. Even if you specify only UDP interfaces here, the server will start the TCP engine too. If you don't want this, you need to disable the TCP support completely with the core parameter disable_tcp.

log_facility

If OpenSIPS logs to syslog, you can control the facility for logging. Very useful when you want to divert all OpenSIPS logs to a different log file. See the man page syslog(3) for more details.

For more see: http://www.voice-system.ro/docs/ser-syslog/

Default value is LOG_DAEMON.

Example of usage:

    log_facility=LOG_LOCAL0

log_name

Set the id to be printed in syslog. The value must be a string and has effect only when OpenSIPS runs in daemon mode (fork=yes), after daemonize. Default value is argv[0].

Example of usage:

    log_name="osips-5070"

log_stderror

With this parameter you can make OpenSIPS to write log and debug messages to standard error. Possible values are:

- "yes" - write the messages to standard error

- "no" - write the messages to syslog

Default value is "no".

For more see: http://www.voice-system.ro/docs/ser-syslog/

Example of usage:

    log_stderror=yes

max_while_loops

The parameters set the value of maximum loops that can be done within a "while". Comes as a protection to avoid infinite loops in config file execution. Default is 100.

Example of usage:

    max_while_loops=200

maxbuffer

The size in bytes not to be exceeded during the auto-probing procedure of discovering the maximum buffer size for receiving UDP messages. Default value is 262144.

Example of usage:

    maxbuffer=65536

memlog

Log level to print memory debug info. It has be less than the value of 'debug' parameter if you want memory info to be logged. Default: memlog=L_DBG (4)

Example of usage:

    memlog=2

mcast_loopback

It can be 'yes' or 'no'. If set to 'yes', multicast datagram are sent over loopback. Default value is 'no'.

Example of usage:

    mcast_loopback=yes

mcast_ttl

Set the value for multicast ttl. Default value is OS specific (usually 1).

Example of usage:

    mcast_ttl=32

mhomed

Set the server to try to locate outbound interface on multihomed host. By default is not (0) - it is rather time consuming.

Example of usage:

    mhomed=1

mpath

Set the module search path. This can be used to simplify the loadmodule parameter

Example of usage:

    mpath="/usr/local/lib/opensips/modules"
    loadmodule "mysql.so"
    loadmodule "uri.so"
    loadmodule "uri_db.so"
    loadmodule "sl.so"
    loadmodule "tm.so"
    ...

open_files_limit

If set and bigger than the current open file limit, OpenSIPS will try to increase its open file limit to this number. Note: OpenSIPS must be started as root to be able to increase a limit past the hard limit (which, for open files, is 1024 on most systems).

Example of usage:

    open_files_limit=2048

port

The port the SIP server listens to. The default value for it is 5060.

Example of usage:

    port=5080

reply_to_via

If it is set to 1, any local reply is sent to the address advertised in top most Via of the request. Default value is 0 (off).

Example of usage:

    reply_to_via=0

rev_dns

This parameter controls if the SIP server should attempt to lookup its own IP address in DNS. If this parameter is set to yes and the IP address is not in DNS a warning is printed on syslog and a "received=" field is added to the via header.

Default is no.

server_header

The body of Server header field generated by OpenSIPS when it sends a request as UAS. It defaults to "OpenSIPS (<version> (<arch>/<os>))".

Example of usage:

server_header="Server: My Company SIP Proxy"

Please note that you have to add the header name "Server:", otherwise OpenSIPS will just write a header like:

My Company SIP Proxy

server_signature

This parameter controls the "Server" header in any locally generated message.

Example of usage:

     server_signature=no

If it is enabled (default=yes) a header is generated as in the following example:

     Server: OpenSIPS (0.9.5 (i386/linux))

sip_warning

Can be 0 or 1. If set to 1 (default value is 0) a 'Warning' header is added to each reply generated by OpenSIPS. The header contains several details that help troubleshooting using the network traffic dumps.

Example of usage:

    sip_warning=0

tcp_children

Number of children processes to be created for reading from TCP connections. If no value is explicitly set, the same number of TCP children as UDP children (see "children" parameter) will be used.

Example of usage:

    tcp_children=4

tcp_accept_aliases

tcp_send_timeout

Time in seconds after a TCP connection will be closed if it is not available for writing in this interval (and OpenSIPS wants to send something on it).

Example of usage:

    tcp_send_timeout=3

tcp_connect_timeout

Time in seconds before an ongoing attempt to connect will be aborted.

Example of usage:

    tcp_connect_timeout=5

tcp_connection_lifetime!!!!

Lifetime in seconds for TCP sessions. TCP sessions which are inactive for >tcp_connection_lifetime will be closed by OpenSIPS. Default value is defined in tcp_conn.h: #define DEFAULT_TCP_CONNECTION_LIFETIME 120. Setting this value to 0 will close the TCP connection pretty quick ;-). You can also set the TCP lifetime to the expire value of the REGISTER by using the tcp_persistent_flag parameter of the registrar module.

Example of usage:

    tcp_connection_lifetime=3600

tcp_max_connections

maximum number of tcp connections (if the number is exceeded no new tcp connections will be accepted). Default is defined in tcp_conn.h: #define DEFAULT_TCP_MAX_CONNECTIONS 2048

Example of usage:

    tcp_max_connections=4096

tcp_poll_method

poll method used (by default the best one for the current OS is selected). For available types see io_wait.c and poll_types.h: none, poll, epoll_lt, epoll_et, sigio_rt, select, kqueue, /dev/poll

Example of usage:

    tcp_poll_method=select

tls_ca_list

See : TLS tutorial.

tls_certificate

See : TLS tutorial.

tls_ciphers_list

See : TLS tutorial.

tls_domain

See : TLS tutorial.

tls_handshake_timeout

See : TLS tutorial.

tls_log

See : TLS tutorial.

tls_method

See : TLS tutorial.

tls_port_no

See : TLS tutorial.

tls_private_key

See : TLS tutorial.

tls_require_certificate

See : TLS tutorial.

tls_send_timeout

See : TLS tutorial.

tls_verify_client

See : TLS tutorial.

tls_verify_server

See : TLS tutorial.

tos

The TOS (Type Of Service) to be used for the sent IP packages (both TCP and UDP).

Example of usage:

    tos=IPTOS_LOWDELAY
    tos=0x10
    tos=IPTOS_RELIABILITY

user uid

The user id to run OpenSIPS (OpenSIPS will suid to it).

Example of usage:

    user="opensips"

user_agent_header

The body of User-Agent header field generated by OpenSIPS when it sends a request as UAC. It defaults to "OpenSIPS (<version> (<arch>/<os>))".

Example of usage:

user_agent_header="User-Agent: My Company SIP Proxy"

Please note that you have to include the header name "User-Agent:" as OpenSIPS does not add it and you will get an erroneous header like:

My Company SIP Proxy

wdir

The working directory used by OpenSIPS at runtime. You might find it usefull when come to generating core files :)

Example of usage:

     wdir="/usr/local/opensips"
     or
     wdir=/usr/opensips_wd

Page last modified on August 05, 2013, at 04:01 PM