Documentation
|
Documentation.Tutorials-Presence-PuaXmppConfig History
Show minor edits - Show changes to markup
July 02, 2014, at 02:50 PM
by 89.120.101.121 -
Deleted lines 188-192:
# make pua_usrloc send PUBLISH for phones which do not support
# presence filter after User-Agent header
if ( $hdr("User-Agent")!~"X-Lite" )
pua_set_publish();
July 02, 2014, at 02:28 PM
by 89.120.101.121 -
Deleted line 35:
July 02, 2014, at 02:26 PM
by 89.120.101.121 -
Changed lines 1-5 from:
<-Back
Download
# OpenSIPS SIP-XMPP Gateway
debug=3 log_stderror=no log_facility=LOG_LOCAL0
fork=yes children=4
listen=udp:10.10.10.10:5060 alias="sip.domain.com"
# ------------------ module loading ----------------------------------
mpath="/usr/local/lib/opensips/modules/"
loadmodule "db_mysql.so" loadmodule "textops.so" loadmodule "maxfwd.so" loadmodule "rr.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "signaling.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "mi_fifo.so" loadmodule "uri.so"
loadmodule "xmpp.so" loadmodule "pua.so" loadmodule "pua_xmpp.so" loadmodule "presence.so" loadmodule "presence_xml.so"
# ----------------- setting module-specific parameters --------------- modparam("usrloc|presence|presence_xml|pua", "db_url", "mysql://opensips:opensipsrw@localhost/opensips") modparam("presence|pua_xmpp", "server_address", "sip:sa@10.10.10.10:5060") modparam("presence_xml", "force_active", 1) modparam("pua_xmpp", "presence_server", "sip:sa@10.10.10.10:5060")
modparam("xmpp", "xmpp_domain", "sip.domain.com") # the name that OpenSIPS will register with as a component to the jabber server modparam("xmpp", "xmpp_host", "xmpp.domain.com") # the location of the jabber server modparam("xmpp", "sip_domain", "sip.domain.com") # the domain of the sip users visible to the xmpp users modparam("xmpp", "backend", "component") modparam("xmpp", "outbound_proxy", "sip:10.10.10.10:5060")
modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo") modparam("usrloc", "db_mode", 2)
route { if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }
if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { setflag(1); # do accounting ... setflag(3); # ... even if the transaction fails } else if (is_method("INVITE")) { # even if in most of the cases is useless, do RR for # re-INVITEs alos, as some buggy clients do change route set # during the dialog. record_route(); } # route it out to whatever destination was set by loose_route() # in $du (destination URI). route(1); } else { /* uncomment the following lines if you want to enable presence */ if (is_method("SUBSCRIBE|NOTIFY")) { ## # in-dialog subscribe requests route(2); exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { # non loose-route, but stateful ACK; must be an ACK after # a 487 or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction -> # ignore and discard exit; } } sl_send_reply("404","Not here"); } exit; } #initial requests
# CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; }
t_check_trans();
# authenticate if from local subscriber (uncomment to enable auth) # authenticate all initial non-REGISTER request that pretend to be # generated by local subscriber (domain from FROM URI is local) ##if (!(method=="REGISTER") && from_uri==myself) /*no multidomain version*/ ##if (!(method=="REGISTER") && is_from_local()) /*multidomain version*/ ##{ ## if (!proxy_authorize("", "subscriber")) { ## proxy_challenge("", "0"); ## exit; ## } ## if (!db_check_from()) { ## sl_send_reply("403","Forbidden auth ID"); ## exit; ## } ## ## consume_credentials(); ## # caller authenticated ##}
# preloaded route checking if (loose_route()) { xlog("L_ERR", "Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]"); if (!is_method("ACK")) sl_send_reply("403","Preload Route denied"); exit; } # handle initial presence messages if(uri==myself || uri=~"sip:.+gmail.com" || uri=~"sip:.+@xmpp.domain.com") # detect if it's for an XMPP user { if( is_method("PUBLISH|SUBSCRIBE")) route(2); };
# handle xmpp messages if(is_method("MESSAGE") && (uri=~"sip:.+gmail.com" || uri=~"sip:.+@xmpp.domain.com")) { if(!t_newtran()) { sl_reply_error(); exit; } if (xmpp_send_message()) { t_reply("200", "Accepted"); } else { t_reply("404", "Not found"); } exit; };
# record routing if (!is_method("REGISTER|MESSAGE")) record_route();
# account only INVITEs if (is_method("INVITE")) { setflag(1); # do accounting } if (!uri==myself) ## replace with following line if multi-domain support is used ##if (!is_uri_host_local()) { append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS ##if($rd=="tls_domain1.net") { ## t_relay("tls:domain1.net"); ## exit; ##} else if($rd=="tls_domain2.net") { ## t_relay("tls:domain2.net"); ## exit; ##} route(1); }
# requests for my domain
if (is_method("REGISTER")) { # authenticate the REGISTER requests (uncomment to enable auth) ##if (!www_authorize("", "subscriber")) ##{ ## www_challenge("", "0"); ## exit; ##} ## ##if (!db_check_to()) ##{ ## sl_send_reply("403","Forbidden auth ID"); ## exit; ##}
if (!save("location")) sl_reply_error();
exit; }
if ($rU==NULL) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; }
# apply DB based aliases (uncomment to enable) ##alias_db_lookup("dbaliases");
# do lookup with method filtering if (!lookup("location","m")) { switch ($retcode) { case -1: case -3: t_newtran(); t_reply("404", "Not Found"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } }
# when routing via usrloc, log the missed calls also setflag(2);
route(1); }
route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP
if (!t_relay()) { sl_reply_error(); }; exit; }
route[2] { # create new transaction to catch retransmissions if(!t_newtran()) { sl_reply_error(); exit; }
# if it is Notify - for xmpp gateway if( is_method("NOTIFY")) { t_reply("200", "OK"); pua_xmpp_notify(); exit; }
# handle presence specific messages if(is_method("PUBLISH")) { handle_publish(); } else if(is_method("SUBSCRIBE")) { handle_subscribe(); if($hdr(Event)== "presence" && (uri=~"sip:.+gmail.com" || uri=~"sip:.+@xmpp.domain.com") ) pua_xmpp_req_winfo("$ruri", "$hdr(Expires)"); } exit; }
to:
#
# OpenSIPS 1.11.x configuration file
#
# SIP to XMPP Gateway + SIP Presence Server
#
# ----------- global configuration parameters ------------------------
debug=3
fork=yes
log_stderror=no
check_via=no
dns=no
rev_dns=no
listen=udp:10.10.10.10:5060
children=2
alias="sip.domain.com"
# ------------------ module loading ----------------------------------
mpath="/usr/local/opensips/lib/modules/"
loadmodule "db_mysql.so"
loadmodule "sl.so"
loadmodule "signaling.so"
loadmodule "tm.so"
loadmodule "maxfwd.so"
alias="sip.domain.com"
loadmodule "textops.so"
loadmodule "sipmsgops.so"
loadmodule "rr.so"
loadmodule "mi_fifo.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "presence.so"
loadmodule "presence_xml.so"
loadmodule "xmpp.so"
loadmodule "pua.so"
loadmodule "pua_xmpp.so"
# Uncomment this if you want digest authentication
#loadmodule "auth.so"
#loadmodule "auth_db.so"
# ----------------- setting module-specific parameters ---------------
modparam("mi_fifo","fifo_name","/tmp/opensips_fifo")
# -- usrloc params --
modparam("usrloc","db_mode",2)
modparam("usrloc","db_url","mysql://opensips:opensipsrw@localhost/opensips")
# -- auth params --
# Uncomment if you are using auth module
#modparam("auth_db", "calculate_ha1", yes)
#modparam("auth_db", "password_column", "password")
# -- presence params --
modparam("presence|presence_xml","db_url","mysql://opensips:opensipsrw@localhost/opensips")
modparam("presence","server_address","sip:sa@10.10.10.10:5060")
modparam("presence_xml","force_active",1)
# -- pua and pua_xmpp parameters --
modparam("pua","db_url","mysql://opensips:opensipsrw@localhost/opensips")
modparam("pua_xmpp","default_domain","10.10.10.10")
# -- xmpp parameters --
# the name that OpenSIPS will register with as a component to the jabber server
modparam("xmpp", "xmpp_domain", "sip.domain.com")
# the location of the jabber server
modparam("xmpp", "xmpp_host", "xmpp.domain.com")
# the domain of the sip users visible to the xmpp users
modparam("xmpp", "sip_domain", "sip.domain.com")
modparam("xmpp", "backend", "component")
modparam("xmpp", "outbound_proxy", "sip:10.10.10.10:5060")
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks
if(!mf_process_maxfwd_header("10")) {
send_reply("483","Too Many Hops");
exit;
}
if (has_totag()) {
# sequential requests within a dialog should
# take the path determined by record-routing
if (loose_route()) {
# route it out to whatever destination was set by loose_route()
# in $du (destination URI).
route(relay);
} else {
if (is_method("SUBSCRIBE|NOTIFY") && uri==myself) {
# in-dialog subscribe requests
route(handle_presence);
exit;
} else if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but stateful ACK; must be an ACK after
# a 487 or e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction ->
# ignore and discard
exit;
}
}
send_reply("404","Not here");
}
exit;
}
# CANCEL processing
if (is_method("CANCEL")) {
if (t_check_trans())
t_relay();
exit;
}
t_check_trans();
# authenticate if from local subscriber (uncomment to enable auth)
# authenticate all initial non-REGISTER request that pretend to be
# generated by local subscriber (domain from FROM URI is local)
##if (!(method=="REGISTER") && from_uri==myself) {
## if (!proxy_authorize("", "subscriber")) {
## proxy_challenge("", "0");
## exit;
## }
## if (!db_check_from()) {
## send_reply("403","Forbidden auth ID");
## exit;
## }
##
## consume_credentials();
##}
# SIP to XMPP traffic (to an XMPP user)
if ( ($rd=~".+gmail.com$" || $rd=="xmpp.domain.com") ) {
# handle initial presence messages
if ( is_method("PUBLISH|SUBSCRIBE") )
route(handle_presence);
# handle xmpp messages
if (is_method("MESSAGE") ) {
t_newtran();
if (xmpp_send_message()) {
t_reply("200", "Accepted");
} else {
t_reply("404", "Not found");
}
exit;
}
} # SIP 2 XMPP
# record routing
if (!is_method("REGISTER|MESSAGE"))
record_route();
if (uri!=myself) {
# routing to other SIP domains
route(relay);
}
# SIP 2 SIP presence traffic
if (is_method("PUBLISH|SUBSCRIBE")) {
route(handle_presence);
exit;
}
if (is_method("REGISTER")) {
# Uncomment this if you want to use digest authentication
#if (!www_authorize("", "subscriber")) {
# www_challenge("", "0");
# exit;
#}
# make pua_usrloc send PUBLISH for phones which do not support
# presence filter after User-Agent header
if ( $hdr("User-Agent")!~"X-Lite" )
pua_set_publish();
save("location");
exit;
}
# native SIP destinations are handled using our USRLOC DB
if(!lookup("location")) {
send_reply("404","Not Found");
exit;
}
route(relay);
}
route[relay]{
# send it out
if(!t_relay())
sl_reply_error();
exit;
}
route[handle_presence]
{
if(!t_newtran()){
sl_reply_error();
exit;
}
# if it is NOTIFY - for xmpp gateway
if( is_method("NOTIFY")) {
t_reply("200", "OK");
pua_xmpp_notify();
} else
if (is_method("PUBLISH")) {
handle_publish();
} else
if (is_method("SUBSCRIBE")) {
handle_subscribe();
if( $hdr(Event)== "presence" &&
($rd=~".+gmail.com$" || $rd=="xmpp.domain.com") )
pua_xmpp_req_winfo("$ru", "$hdr(Expires)");
}
exit;
}
May 09, 2013, at 01:47 PM
by 109.99.235.212 -
Added lines 1-5:
<-Back
Download
# OpenSIPS SIP-XMPP Gateway
debug=3 log_stderror=no log_facility=LOG_LOCAL0
fork=yes children=4
listen=udp:10.10.10.10:5060 alias="sip.domain.com"
# ------------------ module loading ----------------------------------
mpath="/usr/local/lib/opensips/modules/"
loadmodule "db_mysql.so" loadmodule "textops.so" loadmodule "maxfwd.so" loadmodule "rr.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "signaling.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "mi_fifo.so" loadmodule "uri.so"
loadmodule "xmpp.so" loadmodule "pua.so" loadmodule "pua_xmpp.so" loadmodule "presence.so" loadmodule "presence_xml.so"
# ----------------- setting module-specific parameters --------------- modparam("usrloc|presence|presence_xml|pua", "db_url", "mysql://opensips:opensipsrw@localhost/opensips") modparam("presence|pua_xmpp", "server_address", "sip:sa@10.10.10.10:5060") modparam("presence_xml", "force_active", 1) modparam("pua_xmpp", "presence_server", "sip:sa@10.10.10.10:5060")
modparam("xmpp", "xmpp_domain", "sip.domain.com") # the name that OpenSIPS will register with as a component to the jabber server modparam("xmpp", "xmpp_host", "xmpp.domain.com") # the location of the jabber server modparam("xmpp", "sip_domain", "sip.domain.com") # the domain of the sip users visible to the xmpp users modparam("xmpp", "backend", "component") modparam("xmpp", "outbound_proxy", "sip:10.10.10.10:5060")
modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo") modparam("usrloc", "db_mode", 2)
route { if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }
if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { setflag(1); # do accounting ... setflag(3); # ... even if the transaction fails } else if (is_method("INVITE")) { # even if in most of the cases is useless, do RR for # re-INVITEs alos, as some buggy clients do change route set # during the dialog. record_route(); } # route it out to whatever destination was set by loose_route() # in $du (destination URI). route(1); } else { /* uncomment the following lines if you want to enable presence */ if (is_method("SUBSCRIBE|NOTIFY")) { ## # in-dialog subscribe requests route(2); exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { # non loose-route, but stateful ACK; must be an ACK after # a 487 or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction -> # ignore and discard exit; } } sl_send_reply("404","Not here"); } exit; } #initial requests
# CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; }
t_check_trans();
# authenticate if from local subscriber (uncomment to enable auth) # authenticate all initial non-REGISTER request that pretend to be # generated by local subscriber (domain from FROM URI is local) ##if (!(method=="REGISTER") && from_uri==myself) /*no multidomain version*/ ##if (!(method=="REGISTER") && is_from_local()) /*multidomain version*/ ##{ ## if (!proxy_authorize("", "subscriber")) { ## proxy_challenge("", "0"); ## exit; ## } ## if (!db_check_from()) { ## sl_send_reply("403","Forbidden auth ID"); ## exit; ## } ## ## consume_credentials(); ## # caller authenticated ##}
# preloaded route checking if (loose_route()) { xlog("L_ERR", "Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]"); if (!is_method("ACK")) sl_send_reply("403","Preload Route denied"); exit; } # handle initial presence messages if(uri==myself || uri=~"sip:.+gmail.com" || uri=~"sip:.+@xmpp.domain.com") # detect if it's for an XMPP user { if( is_method("PUBLISH|SUBSCRIBE")) route(2); };
# handle xmpp messages if(is_method("MESSAGE") && (uri=~"sip:.+gmail.com" || uri=~"sip:.+@xmpp.domain.com")) { if(!t_newtran()) { sl_reply_error(); exit; } if (xmpp_send_message()) { t_reply("200", "Accepted"); } else { t_reply("404", "Not found"); } exit; };
# record routing if (!is_method("REGISTER|MESSAGE")) record_route();
# account only INVITEs if (is_method("INVITE")) { setflag(1); # do accounting } if (!uri==myself) ## replace with following line if multi-domain support is used ##if (!is_uri_host_local()) { append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS ##if($rd=="tls_domain1.net") { ## t_relay("tls:domain1.net"); ## exit; ##} else if($rd=="tls_domain2.net") { ## t_relay("tls:domain2.net"); ## exit; ##} route(1); }
# requests for my domain
if (is_method("REGISTER")) { # authenticate the REGISTER requests (uncomment to enable auth) ##if (!www_authorize("", "subscriber")) ##{ ## www_challenge("", "0"); ## exit; ##} ## ##if (!db_check_to()) ##{ ## sl_send_reply("403","Forbidden auth ID"); ## exit; ##}
if (!save("location")) sl_reply_error();
exit; }
if ($rU==NULL) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; }
# apply DB based aliases (uncomment to enable) ##alias_db_lookup("dbaliases");
# do lookup with method filtering if (!lookup("location","m")) { switch ($retcode) { case -1: case -3: t_newtran(); t_reply("404", "Not Found"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } }
# when routing via usrloc, log the missed calls also setflag(2);
route(1); }
route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP
if (!t_relay()) { sl_reply_error(); }; exit; }
route[2] { # create new transaction to catch retransmissions if(!t_newtran()) { sl_reply_error(); exit; }
# if it is Notify - for xmpp gateway if( is_method("NOTIFY")) { t_reply("200", "OK"); pua_xmpp_notify(); exit; }
# handle presence specific messages if(is_method("PUBLISH")) { handle_publish(); } else if(is_method("SUBSCRIBE")) { handle_subscribe(); if($hdr(Event)== "presence" && (uri=~"sip:.+gmail.com" || uri=~"sip:.+@xmpp.domain.com") ) pua_xmpp_req_winfo("$ruri", "$hdr(Expires)"); } exit; }
|